1. Catalogs
  2. Garland
  3. Installation/Operation Manual: All RTGA & RGM Series Gas Griddles, part #1382696
video corpo
cad

Installation/Operation Manual: All RTGA & RGM Series Gas Griddles, part #1382696

Installation/Operation Manual: All RTGA & RGM Series Gas Griddles, part #1382696
1 / 16 PagesView full catalog

Installation/Operation Manual: All RTGA & RGM Series Gas Griddles, part #1382696

Product catalog summary
Important Information: Maintenance and repairs must be conducted by authorized service agents using genuine parts to maintain warranty coverage. Unauthorized modifications void warranty obligations. Safety warnings include avoiding flammable materials near the appliance and ensuring proper installation to prevent damage or injury.
Introduction: The document introduces the "Regal" Series Counter Griddles, emphasizing the importance of checking for shipping damage and locating the rating plate for service and warranty purposes.
Installation: Installation must be performed by licensed professionals, adhering to specific clearances for combustible and non-combustible installations. It includes positioning, leveling, air supply, ventilation requirements, and gas supply connections, with a focus on the necessity of a gas shut-off valve and pressure regulator.
Initial Operation: Instructions for lighting the griddle and preparing it for use are provided, including seasoning the griddle surface and ensuring all components are correctly adjusted.
Cleaning and Maintenance: Regular cleaning is essential for maintaining equipment performance and longevity. Daily and periodic cleaning routines are specified, particularly for stainless steel components.
Service and Parts: Emphasizes the use of authorized service agents and genuine parts for repairs and maintenance to ensure safety and maintain warranty coverage.
Specifications and Adjustments: Appliances are pre-adjusted for sea level conditions, but adjustments may be necessary for local conditions such as gas pressure and altitude. These adjustments are the responsibility of the customer, installer, or dealer.
Final Preparation: New units should be cleaned with hot, soapy water to remove any residue before use. Griddle seasoning involves cleaning, applying shortening, heating, and rubbing the surface.
Cleaning Stainless Steel: Use hot, soapy water and a liquid cleaner for stainless steel parts, avoiding abrasive materials. For encrusted materials, soak and use a wood or nylon scraper.
Gas Supply and Regulation: A manual shut-off valve must be installed on the gas supply line before the appliance and pressure regulator. Regulators are factory-set and should not be adjusted unless necessary.
Legal Regulations: All installations must adhere to relevant codes and standards. Unauthorized modifications or repairs using non-original parts void warranties and may lead to safety hazards.
Warnings: Improper installation or maintenance can result in property damage, injury, or death. Users should follow all safety instructions and ensure the appliance is installed by qualified personnel. The product contains chemicals known to cause cancer and reproductive harm, as recognized by the state of California.
See more

Catalog excerpts

Installation/Operation Manual: All RTGA & RGM Series Gas Griddles, part #1382696-1

OPERATION MANUAL "REGAL" SERIES COUNTER GRIDDLES- OR OTHER FLAMMABLE VAPORS OR IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE PROPERTY DAMAGE, INJURY, OR DEATH. READ THE INSTALLATION, INSTRUCTIONS THOROUGHLY SERVICING THIS EQUIPMENT PLEASE READ ALL SECTIONS OF THIS MANUAL AND RETAIN FOR FUTURE REFERENCE. THIS PRODUCT HAS BEEN CERTIFIED AS COMMERCIAL COOKING EQUIPMENT AND MUST BE INSTALLED BY PROFESSIONAL THIS PRODUCT MUST BE INSTALLED BY A LICENSED PLUMBER OR GAS FITTER. APPROVAL Post In a prominent location, Instructions to be followed In the event the user smells gas.This information shall be obtained by consulting your local gas supplier. Users are cautioned that maintenance and repairs must be performed by a Garland authorized service agent using genuine Garland replacement parts. Garland will have no obligation with respect to any product that has been improperly installed, adjusted, operated or not maintained in accordance with national and local codes or installation instructions provided with the product, or any product that has its serial number defaced, obliterated or removed, or which has been modified or repaired using unauthorized parts or by unauthorized service agents. For a list of authorized service agents, please refer to the Garland web site at http://www.garland-group.com. The information contained herein, (including design and parts specifications), may be superseded and is subject to change without notice. GARLAND COMMERCIAL INDUSTRIES 185 East South Street GARLAND COMMERCIAL RANGES, LTD. 1177 Kamato Road, Mississauga, Ontario L4W 1X4 Swallowfield Way, Hayes, Middlesex UB3 1DQ ENGLAND © 2005 Garland Commercial Industries, Inc.

 Open the catalog to page 1
Installation/Operation Manual: All RTGA & RGM Series Gas Griddles, part #1382696-2

IMPORTANT INFORMATION This product contains chemicals known to the state of California to cause cancer and/or birth defects or other reproductive harm. Installation and servicing of this product could expose you to airborne particles of glass wool/ceramic fibers. Inhalation of airborne particles of glass wool/ceramic fibers is known to the state of California to cause cancer. Operation of this product could expose you to carbon monoxide if not adjusted properly. Inhalation of carbon monoxide is known to the state of California to cause birth defects or other reproductive harm. Keep appliance...

 Open the catalog to page 2
Installation/Operation Manual: All RTGA & RGM Series Gas Griddles, part #1382696-3

TABLE OF CONTENTS IMPORTANT INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Uncrating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Rating Plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 INSTALLATION . . . . . . . . . . . . . . . . ....

 Open the catalog to page 3
Installation/Operation Manual: All RTGA & RGM Series Gas Griddles, part #1382696-4

U.S. Range manufactures the "Regal"Griddles in widths from 24" to seven feet, manually or thermostatically controlled, with or without open burners in combination, and with the option of a grooved griddle surface. Installation in all cases is All griddles are shipped completely assembled, with the grease can (and drip pan, when applicable) and pressure Griddle burners are tied to the frame at the rear to stop vibration during shipment and open burner heads, (when applicable) are tied to the burner hangers. All griddles are inspected at the factory before shipping. After uncrating, immediately...

 Open the catalog to page 4
Installation/Operation Manual: All RTGA & RGM Series Gas Griddles, part #1382696-5

INSTALLATION Continued The area around the appliance must be kept clear to avoid any obstruction to the flow of combustion and ventilation air, as well as, for ease of maintenance and service. Means must be provided for any commercial, heavy-duty cooking appliance to exhaust combustion waste products to the outside of the building. US Range Griddles must be under a vent hood! Filters and drip troughs should be part of any industrial hood, but consult local codes before construction and installing a hood. Strong exhaust fans in this hood or in the overall air conditioning system can produce a...

 Open the catalog to page 5
Installation/Operation Manual: All RTGA & RGM Series Gas Griddles, part #1382696-6

INSTALLATION Continued WARNING Failure to install a pressure regulator will void Rigid Connections Double-check any installer-supplied intake pipes visually and clear any dirt particles, threading chips, or other foreign matter before installing in a service line.Those particles will clog orifices when gas pressure is applied. WARNING All connections must be sealed with a joint compound suitable for LP gas, and all connections must be tested with a soapy solution before lighting any pilots! Flexible Couplings & Connectors. If the unit is to be installed with flexible couplings and/or quick-disconnect...

 Open the catalog to page 6
Installation/Operation Manual: All RTGA & RGM Series Gas Griddles, part #1382696-7

INITIAL OPERATION Lighting Instructions Initial pilot light is in the following sequence: 1 Turn the manual-off valve on the incoming service line 2. Turn all burner valves "OFF" 3. Close all Pilot adjusting screws (clockwise turn all the 4. Wait for any accumulated gas to disperse. 5. Open the manual shut-off valve. 6. Apply a lighted match or taper to a pilot burner and open that pilot's adjustment screw gradually until the pilot 7. Adjust the pilot flame for the desired characteristics 8. Turn "ON"that burner and watch to make sure it lights from the pilot, then turn the burner'OFF" 9. Repeat...

 Open the catalog to page 7
Installation/Operation Manual: All RTGA & RGM Series Gas Griddles, part #1382696-8

WARNING If gas odors are detected, the gas supply must be turned "OFF'at the main shut-off valve and the local gas company or authorized service agency contacted for General Cleaning Any piece of equipment works better and lasts longer when maintained properly and kept clean. Cooking equipment is no exception. Your U.S. Range hot plate must be kept clean during the working day and thoroughly cleaned at the end 1. Check the griddle grease trough and grease can frequently during the day and drain as necessary. At the end of each day, remove and drain the grease can and wash in hot, soapy water....

 Open the catalog to page 8
Installation/Operation Manual: All RTGA & RGM Series Gas Griddles, part #1382696-9

iuejn6y 'a6uey STI eesuoine a|eDO| aDjAjas ap 3Dua6e,| jed si¡ej ajia luaAjop suoaejedai sa| ia ua¡iajiua,| 'uo¡ie||eisu¡;| jajjiaj e sa|q¡ssodw¡ anbsajd luos sajnAej sa-] -aiqepApoxj Jepe,| jauej6 jnod anb¡||eiaw |¡ino ajine unDne ¡u |eiaw ua a|nieds ap ¡u neainoD ap sed zas¡|¡in,N uo|Áu ua no s¡oq ua j¡ouej6 un aimsua zas¡|¡in ia ja||ODap a| jnod a||mooi uojjjip un DaAe aisnjDUj impojd a| zadwaji 'saisnjDUj simpojd sap jajjiaj jnod a|qepÁxou¡ Jepe,| jauej6 ap ajjessaDau isa |¡,s ¡a6eÁoiiau ap sajpnod ap ¡u sjjsejqe snssji ap 'Jepe,p au¡e| ap sed zas¡|¡in,N -aaujnof anbeip ap uy B\ e |epads...

 Open the catalog to page 9
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.