Catalogs >
Garland >
CG Series Chain Griddles Counter Equipment

CG Series Chain Griddles Counter Equipment
2Pages

Catalog excerpts

CG Series Chain Griddles Counter Equipment - 1

Master Gas Production Griddle Project:_____________________________ Approval:___________________________ Date:_______________________________ • Electric main on/off power switch w/ indicator light • Electric on/off switch for each thermostat burner system, also has indicator light • Electronic thermostat 150°F (101°C) to 450°F (268°C) for each burner every 12" (305mm) • Gas pilot ignition indicator light • Stainless steel sides • Stainless steel valve panel • Stainless steel backguard Model CG-48R (shown w/optional stand & casters) NOTE: Griddles supplied with casters must be installed with an approved restraining device. Standard Features: • Rear grease trough with bottom drawer. • Full width front rail • 1" (25mm) polished finish steel plate • One “U” shaped 30,000 BTU (8.8kW) burner every 12" (305mm) of griddle width • Electronic controls • Stainless steel grease trough Optional Features:  208-240 Volts, 60 Hz, no charge  10-1/2" (267mm) sloped grease drawers (Stand Models Only), no charge. 1.4 gal/5.25 L  Protective Shield for controls  3/4” x 36” Quick Disconnect gas hose w/restraining device  Stainless steel open stand, 30.292" (769mm) high with stainless steel bottom shelf on adjustable legs or casters (specify) • Stainless steel side griddle splash-  Optional extended rear gas conguards nection • Gas regulator valve • Stainless steel 6" (152mm) deep, std grease drawers with integral grease baffle. Capacity 1.6 gal/6 L. • 6" (152mm) high stainless steel adjustable legs  4” (102mm) high stainless steel adjustable legs & 3-1/4” (83mm) high grease drawer, ideal for refrigerated equipment base mounts. Grease drawer capacity 2.36 gal/ 8.9 L. • Nickel plated thermostat guards • 8" (203mm) high back splash • Contoured grease chute opening Specification: Heavy duty gas griddles (available in four sizes, 24” 36", 48", 60", and 72". High performance volume production with even, consistent, controlled temperatures. 1"(25mm) thick griddle plate. Electronic thermostat with embedded sensor and efficient 'U' shaped burner every 12"(205mm) of griddle width All stainless steel exterior. Full width front rail. 6" (152mm) legs standard or optional stand available. Garland Commercial Ranges Ltd. 1177 Kamato Road, Mississauga, Ontario L4W 1X4 CANADA General Inquiries 1-905-624-0260 USA Sales, Parts and Service 1-800-424-2411 Canadian Sales 1-888-442-7526 Canada or USA Parts/Service 1-800-

Open the catalog to page 1

CG Series Chain Griddles Counter Equipment - 2

• IMPORTANT: Unit must be installed on legs for proper air circulation. ENTRY CLEARANCE Crated • See illustration for further specifications & size statistics ELECTRICAL CHARACTERISTICS MANIFOLD PRESSURE REQUIRED After Built- In Regulator Natural: 3.5” W.C. (8.75 mbar) 120 V, Single Phase, 60Hz, 1 amp 6' (1829mm) power supply cord provided MINIMUM SUPPLY PRESSURE REQUIRED Natural: 7” W.C. (17.4 mbar) Optional Voltage 208-240 volt, 60 Hz, 0.4 amps, single phase. • . NOTE: No cord and plug on export units. Direct connection on junction box. • Gas Input Ratings shown are for installations up...

Open the catalog to page 2