Product List
1 / 50Páginas

Systems and Components for Roof Landscapes Product List

Table of Contents Slip Sheet and Separation Membrane 3 Root Barriers 4 Root Barriers Accessories 5 Protection Mats 6 8 Drainage Elements Building Protection and Drainage Elements 12 Filter Sheets 14 Mineral Substrates / Delivery Forms 15 System Substrates 16 17 Substrates in Bags / Fertilizer ® Seed Mixtures / Roof Tree Anchorage Robafix 18 Pitched and Steep Pitched Green Roofs 19 20 Shear Protection Accessories ® 21 System Build-ups with Aquafleece AF 300 ® System Build-up “Roof Garden“ with Aquatec AT 45 22 System Build-up “Stormwater Management Roof“ 23 24 Inspection Chambers Dam-up...

Slip Sheet and Separation Membrane Separation and slip sheets, as loosely laid tarps or sheets, protect the waterproofing from tensile and shear forces. In the case of chemically incompatible materials (e.g. single soft PVC sheets on bitumen), a neutral separation layer has to be installed. Only vapour permeable membranes (e.g. TGV 21), and no vapour barriers, should be used over an XPS insulation in inverted roof constructions, in order to avoid condensation within the insulation. Slip Sheet TGF 20 Chemically neutral high-pressure-polyethylene sheet for application as separation and slip...

Root Barriers Root barriers, as loosely laid tarps or welded sheets, protect the waterproofing from root penetration. This protection is mainly necessary for bituminous waterproofings. The hot-air-weldable Root Barrier WSB 100-PO is used on complicated roof areas with many upstands, penetrations, etc. and on intensive green roofs. Large-size tarps of Root Barrier WSF 40 made of special polyethylene, laid with 1.5 m overlap, are suitable for simple extensive green roof areas. In general the material compatibility of the root barrier and the waterproofing has to be taken into account. ZinCo...

Root Barriers Accessories Prefabricated Corner and Unsupported Flashing Prefabricated corner made of FPO, used for Root Barrier WSB 100-PO; compatible with bitumen. Combined internal/external corner. Combined External (EC) and Internal (IC) Corner Unit Piece ca. 0.60 m × 15.00 m Roll weight: ca. 9 kg /roll Clamping profile, e.g. for fixation of root barriers, or pond liners to concrete kerbs or planters, made of aluminium; predrilled holes, spacing between the holes ca. 200 mm. Profile height: ca. 40 mm. AP 40 Unit Bundle of 10 pieces Further Clamping profiles on page 33. Foil-Welding-Set...

Protection Mats Protection mats protect root barriers or root-resistant waterproofing from mechanical damages (necessary according to German Standard DIN 18531 T3, e.g. extensive greening). The mats also function as water and nutrient reservoirs and reduce subsonic noise. Protection Mats TSM 32 and SSM 45 are mainly used for extensive green roofs. On intensive green roofs and under hard surfaces, the solid Protection Mat ISM 50 and the thicker Protection Mat BSM 64 are recommended. In general, protection mats have to be installed with an overlap of at least 100 mm. The installation of a...

Protection Mats Protection Mat BSM 64 Non-rotting, synthetic fibre mat made of polyester/polypropylene mixture; used as protection layer on root barrier or waterproofing; extremely high water storage capacity; compatible with bitumen; biologically and chemically neutral; tearproof; made of recycled material. With proven protection efficiency in accordance with European Standard EN ISO 13428. Strength class 4; water storage capacity ca. 7 l/m2; thickness ca. 7 mm; weight ca. 650 g/m2. BSM 64 Protection Mat WSM 150 Non-rotting, thermally reinforced needle fleece mat made of mixed fibres; used...

Drainage Elements The Floradrain® System has been developed especially for the landscaping of flat roofs. The molded elements of thermoformed recycled polyolefin can store rainwater in water storage cells on the upper side and drain off excess water below. The necessary aeration of the root space is ensured. Floradrain® FD 25-E is particularly suitable for extensive green roofs with a slope while Floradrain® FD 40-E is also suitable for intensive green roofs and for terraces. With Floradrain® FD 60 neo, green roofs with a water dam-up can be created on 0°-roofs. Floradrain® in rolls is...

Drainage Elements Floradrain® FD 40-E Drainage and water storage element made of thermoformed recycled polyolefin (mainly PE), with water storage cells, openings for aeration and diffusion; with channel system on the underside. In-plane water flow rate tested according to European Standard EN ISO 12958. Compatible with bitumen and pressure resistant; butt joint installation; additional connectors available; Floradrain® FD 40-E is used under extensive and simple intensive green roofs as well as under walkways and terraces, even without a slope. Compressive strength: ca. 170 kN/m2; filling...

Drainage Elements Floradrain® FD 60 neo Drainage and water storage element made of thermoformed recycled polyolefin (mainly PE). Developed on the basis of the proven Floradrain® FD 60; usable on both sides. Due the particularly large water storage cells FD 60 neo is especially suitable for use with intensive green roofs without water dam-up and under walkways and terraces. It can also serve as a permanent formwork to be filled with concrete as a base for other roof elements as e.g. driveways or foundations for furniture. Interlocking studs allow for a continuous and safe installation. Very...

Drainage Elements Floraset® Elements contain water storage cells, openings for aeration and diffusion as well as a drainage channel system on the underside. They are especially suited for large green roof areas without slope. In particular Floraset® FS 75 is also used for the System Build-up “Pitched Green Roof“ with slopes up to 25°; in this case Floraset® FS 75 Elements are installed with the studs facing upwards. Floraset® Elements are made of expanded polystyrene (EPS) and are CFC-free. Floraset® FS 50 Drainage board for extensive green roofs on flat roofs with and without slope; made...