Catálogos >
Wells Bloomfields >
Dual Pot Fryers F676-208

Dual Pot Fryers F676-208
1 / 2Páginas

Excertos do catálogo

WELLS MANUFACTURING Overall Dimensions: Temperature Range: Fahrenheit Celsius Pre-Heat Time to 350° F: 5 minutes Watts Per Hour to Maintain 350° F: Typical Production: French Fries (2 oz. servings) Chicken (pounds) Accessories / Options Wells F-676 Built-in Fryer is one of the most durable and versatile fryers in the industry. Swing-up elements allow the fry pots to be easily removed for cleaning, and the low-watt density provides extended oil life. Fry two separate foods at the same time using the • Swing-up elements, located below the baskets, allow easy removal of the fry pots for cleaning. Elements are heavy-duty stainless steel with low watt density for longer oil life. • Element control housings have a spring-loaded support rod to secure elements when in a raised position. • Positive-off thermostats control the elements, allowing for adjustable and more consistent temperatures. Signal lights indicate that the heating elements are energized. • Deep-drawn, removable fry pots are made of nickel-plated steel and can hold up to fifteen • A manual reset safety thermostat will shut off the heating element power and illuminate the signal light if an over-temperature condition • A terminal block is provided for field wiring connection to the main power supply. • Two full size, rear-hanging, interchangeable fry baskets are provided and allow for product versatility. • Wellslok allows for quick and easy installation in stainless steel countertops. Laboratories, Inc. recognized and meets • A one-year warranty against defects covers parts and labor.

Abrir o catálogo na página 1

WELLS MANUFACTURING BUILT-IN FRYER DIMENSIONS: INCH NOTE: Specifications are subject to change without notice. See installation instructions prior to installing the unit. This document is not for installation purposes. The installation of recognized component units requires additional evaluations to Underwriters Laboratories Inc. standards. Depending on the installation, clearances can be changed upon further evaluations to UL standards. THIS UNIT IS DESIGNED TO BE INSTALLED IN METAL COUNTERS ONLY WELLS MANUFACTURING COMPANY 2 ERIK CIRCLE, PO BOX 280, VERDI, NV 89439 U.S.A. © 2002 WELLS...

Abrir o catálogo na página 2