COSMO CA-500.140
1 / 3Páginas

COSMO CA-500.140 ***COSMOPLAST 516 Cyanoacrylate - Fast-Setting Adhesive Examples for Application ■ Electrical / electronic industry ■ EPDM seals in window, facade, and vitrine construction ■ Vehicle / shipbuilding ■ Household appliances production ■ Metal construction / technical industrial supplies ■ Toy industry ■ Clocks / jewellery / optical systems / prize cups Special Properties ■ Good adhesion characteristics to different surfaces ■ Solvent-free ■ Good wetting of the substrate ■ Hard adhesive joint ■ Good UV-stability Technical Data Basis: Modified cyanoacrylates Viscosity measured by cone and plate (300 s-1) at +25 °C approx. 1 000 mPa.s Functional hardness EPDM/EPDM - profile sealing approx. 20 s Curing time at +20°C, 50% r. H. approx. 16 h Softening range from +80 °C Instructions for use The surfaces of the workpieces to be bonded must be dry, and free from dust and grease. Apply the adhesive from the trading unit or by means of a CA-dosing unit onto one side. WGISS GmbH & Co. KG Fax: +49 (0) 2773 / 815 - 200 HansastraUe 2 Email: ks@weiss-chemie.de D-35708 Haiger Web: www.weiss-chemie.de

Technical Data Sheet Cyanoacrylate - Fast-Setting Adhesive Immediately after application, the workpieces must be fit together and pressed until they reach the required functional strength. In principle, CA-adhesives cure by means of air and material humidity. This means that ambient conditions, material and condensation humidity on the surfaces to be glued, thickness of applied adhesive layer and press power, as well as surface roughness of the materials to be glued significantly influence the process. The chemical characteristics of the surfaces to be glued, e.g. pH-value, variations of...

COSMO CA-500.140 ***COSMOPLAST 516 Cyanoacrylate - Fast-Setting Adhesive Packaging PE-bottle, net weight: 20 g PE-bottle, net weight: 50 g PE-bottle, net weight: 500 g Other trading units on request. Accessories COSMO SP-860.120 - CA-accelerator in aerosol can COSMO SP-840.110 - CA-primer for polyolefins WGISS GmbH & Co. KG Fax: +49 (0) 2773 / 815 - 200 HansastraUe 2 Email: ks@weiss-chemie.de D-35708 Haiger Web: www.weiss-chemie.de