MW PLATFORM
1 / 16Páginas

Wind. It means the world to us.1

Are you looking for the maximum return on your investment in wind energy? Wind energy means the world to us. And we want it to mean the world to our customers, too, by maximising your profits and strengthening the certainty of your investment in wind power. That’s why, together with our partners, we always strive to deliver cost-effective wind technologies, high quality products and first class services throughout the entire value chain. And it’s why we put so much emphasis on the reliability, consistency and predictability of our technology. These aren’t idle words. We have over 30 years’...

+13,000 Due to the strong performance and reliability of the 2 MW platform, over 13,000 turbines have been installed since 2002.

How does the 2MW platform increase reliability and performance? Created with future generations of turbines in mind, the 2 MW platform’s single-piece bed frame and stronger main bearing housing provide a better foundation for loads. The toughened frame and housing – each made from single-piece castings – work in conjunction to absorb higher loads from the rotor. Additionally, the housing ensures correct alignment during bearing assembly, making the process more accurate and efficient and distributing loads evenly. These improvements combine to increase production capabilities and reduce...

The 2 MW platform covers all wind segments enabling you to find the best turbine for your specific site. WINDCLASSES - IEC TURBINE TYPE 2 MW TURBINES V110-2.0 MW™ IEC IIIA V100-2.0 MW® IEC IIB V100-1.8/2.0 MW™ IEC IIIA/IEC S V90-1.8/2.0 MW® IEC IIA/ IEC IIIA ■ Standard IEC conditions  ■ Site dependent Low Balance of Plant, installation and transportation costs At Vestas, we use technology tailored to control loads on specific tower heights. We have applied this principle to the 2 MW platform by reducing both the weight of the turbine and the loads on the tower and foundation. This reduces...

Would you benefit from uninterrupted control of wind energy production? Knowledge about wind project planning is key Getting your wind energy project up and operating as quickly as possible is fundamental to its long-term success. One of the first and most important steps is to identify the most suitable location for your wind power plant. Vestas' SiteHunt® is an advanced analytical tool that examines a broad spectrum of wind and weather data to evaluate potential sites and establish which of them can provide optimum conditions for your project. In addition, SiteDesign® optimises the layout...

+25,000 The Vestas Performance and Diagnostics Centre monitors more than 25,000 turbines worldwide. We use this information to continually develop and improve our products and services. monitor performance and produce detailed, tailored reports from anywhere in the world. The VestasOnline® Power Plant Controller offers scalability and fast, reliable real-time control and features customisable configuration, allowing you to implement any control concept needed to meet local grid requirements. Surveillance, maintenance and service Operating a large wind power plant calls for efficient...

V110-2.0 MW™ Facts & figures POWER REGULATION Pitch regulated with variable speed OPERATING DATA Rated power Cut-in wind speed Rated wind speed Cut-out wind speed Wind class Operating temperature range: 2,000 kW (50/60 Hz) 3 m/s 11.5 m/s 20 m/s IEC IIIA standard turbine: -20˚C to 40˚C. low temperature turbine: -30˚C to 40˚C SOUND POWER Max 107.5 dB* (Mode 0, 10 m above ground, hub height 80 m, air density 1.225 kg/m³) tubular steel tower 95 m and 125 m (50 Hz) 80 m and 95 m (60 Hz) * Tower heights are preliminary and subject to change NACELLE DIMENSIONS Height for transport Height installed...

POWER CURVE FOR V110-2.0 MW® Noise reduced sound power modes are available 2,200 2,000 1,800 1,600 · Vestas OptiStop pitch control strategy included to reduce loads and enable a lighter structure · Select products from the Vestas PowerPlus™ range are added to maximise output Yaw Power Backup Increased Cut-In Shadow detection OCAS™ Smoke detection Aviation marking Load mode

V100-2.0 MW® Facts & figures POWER REGULATION Pitch regulated with variable speed OPERATING DATA Rated power Cut-in wind speed Rated wind speed Cut-out wind speed Wind class Operating temperature range: 2,000 kW (50/60 Hz*) 3 m/s 12 m/s 22 m/s IEC IIB standard turbine: -20˚C to 40˚C. low temperature turbine: -30˚C to 40˚C * The rated power for V100 IEC IIIA 60 Hz is limited to 1950 kW in North America SOUND POWER TOWER Type Hub heights tubular steel tower 80 m, 95 m and 120 m (IEC IIB) NACELLE DIMENSIONS Height for transport Height installed (incl. CoolerTop®) Length Width HUB DIMENSIONS...

POWER CURVE FOR V100-2.0 MW® (50/60 Hz) Noise reduced sound power modes are available 2,200 2,000 1,800 1,600 V100-2.0 MW FEATURES · Vestas OptiStop pitch control strategy included to reduce loads and enable a lighter structure · Select products from the Vestas PowerPlus™ range are added to maximise output Yaw Power Backup Increased Cut-In Shadow detection OCAS™ Smoke detection Aviation marking Load mode

V100-1.8/2.0 MW™ Facts & figures POWER REGULATION Pitch regulated with variable speed OPERATING DATA Rated power Cut-in wind speed Rated wind speed Cut-out wind speed Wind class 1,800/2,000 kW (50/60 Hz*) 3 m/s 12 m/s 20 m/s IEC S (IEC IIIA average wind/ IEC IIA extreme wind) standard turbine: -20˚C to 40˚C. low temperature turbine: -30˚C to 40˚C Operating temperature range: * The rated power for V100 IEC IIIA 60 Hz is limited to 1950 kW in North America TOWER Type Hub heights tubular steel tower 80 m, 95 m and 120 m (IEC IIIA) NACELLE DIMENSIONS Height for transport Height installed (incl....

Noise reduced sound power modes are available • Increased Cut-in • Shadow detection • Smoke detection • Aviation marking • Load and power modes