Steel conduit
1 / 2Páginas

Total Cable Management Solutions STEEL CONDUIT (CLASS 4) Rigid steel conduit conforms to the following specification relating to cable management systems: BS4568 part 1: 1970 Clauses 4, 5.1, 5.4, 6.1, 7.1, 7.2, 8 and 9 BS EN 61386-21:2004 Clauses 7.1, 7.5, 8.1, 8.2, 9.1, 10.3, 10.4, and 14.2.2.3 (high protection). The base structure is 20mm (or 25mm or 32mm) seam welded steel tube processed from hot rolled steel strip. BS4568 heavy protection is achieved by the hot dipped galvanising method to the thickness required under BS 4568 and EN 50086. IMPORTANT - Supplied in 3750mm lengths as standard 3000mm lengths available on request and is threaded both ends with a coupler attached at one end. Available in 20 - 25mm diameter and 32mm diameter on request Black enamel conduit in 3000mm lengths is available from stock in 20mm and 25mm.

Total Cable Management Solutions DON’T FORGET THE NUTS & BOLTS OF IT... REMEMBER TO CHECK SECTION 12, ACCESSORIES & SUPPORTS SEE PAGE 124 Total Cable Management Solutions