Hybox® 355
1 / 16Páginas

Hybox® 355 technical guide Structural hollow sections

Introduction Technical data Size range charts Sectional properties Hybox® 355 Circular Sectional properties Hybox® 355 Square Sectional properties Hybox® 355 Rectangular

Hybox® 355 Technical Guide HYBOX 355 Hybox® 355 is a cold formed, high-grade multi-purpose hollow section, offering trusted formability and toughness. It is batch-tested for your assurance. Hybox® 355 key features: • Excellent quality, made with steel from a high quality production process • Minimum strength of 355 MPa • Properties suitable for low temperature applications (-20°C) • Dimensional consistency and corner radius controlled • High levels of formability and, because the steel is fully-killed, excellent weldability • Suitable for applications demanding specific properties •...

Hybox® 355 Technical Guide Technical data TECHNICAL DATA Hybox® 355 hollow sections are supplied with a minimum yield strength of 355 N/mm2 and fully comply with the European Standard for cold formed structural hollow sections, EN10219: S355J2H. High strength cold formed hollow sections suitable for construction and mechanical applications where controlled specifications and associated design regulations apply. Chemical composition and mechanical properties Yield strength Tensile strength Impact strength Carbon equivalent * For section sizes D/T <15 (circular) and (B+H)/2T <12.5...

Hybox® 355 Square Hollow Sections – length and tolerances Size Standard mill lengths Special mill lengths (UK) Special mill lengths (NL) (uti – up to and including) * For sizes 50 x 50 x 5.00 & 60 x 60 x 5.00, the maximum length available is 7.5m Hybox® 355 Rectangular Hollow Sections – length and tolerances Size Standard mill lengths Special mill lengths (UK) Special mill lengths (NL) (uti – up to and including) * For sizes 60 x 40 x 5.00 & 80 x 40 x 5.00, the maximum length available is 7.5m Hybox® 355 Circular Hollow Sections – length and tolerances Outside diameter Standard mill lengths...

Hybox® 355 Technical Guide Size range charts SIZE RANGE CHARTS Hybox® 355 Circular Hollow Sections Hybox® 355 Square Hollow Sections Size (mm)

Hybox® 355 Rectangular Hollow Sections • The tables above and opposite show our normal capability, reference should be made to the sectional properties table to identify sizes that are readily available and should be given preference. • Minimum order quantities may apply to some sizes. • Other sizes can be manufactured – please consult u

Hybox® 355 Technical Guide Sectional properties Hybox® 355 circular Z Hybox® 355 EN10219: S355J2H Cold formed circular hollow section Outside Approx. length

Hybox® 355 EN10219: S355J2H Cold formed circular hollow section (continued) Outside Approx. length /tonne The dimensions shown in silver are standard sizes and should be given preference All other sizes are non-standard and therefore minimum order quantities may apply

Hybox® 355 Technical Guide Sectional properties Hybox® 355 circular and square Z Hybox® 355 EN10219: S355J2H Cold formed circular hollow section (continued) Outside Approx. length /tonne The dimensions shown in silver are standard sizes and should be given preference All other sizes are non-standard and therefore minimum order quantities may apply

Hybox® 355 EN10219: S355J2H Cold formed square hollow section Size Approx. length /tonne

Hybox® 355 Technical Guide Sectional properties Hybox® 355 square and rectangular B Hybox® 355 EN10219: S355J2H Cold formed square hollow section (continued) Size Approx. length /tonne The dimensions shown in silver are standard sizes and should be given preference All other sizes are non-standard and therefore minimum order quantities may apply 12

Hybox® 355 EN10219: S355J2H Cold formed rectangular hollow section Size Thickness Mass Approx length

Hybox® 355 Technical Guide Sectional properties Hybox® 355 rectangular B Hybox® 355 EN10219: S355J2H Cold formed rectangular hollow section (continued) Size Thickness Mass Approx length

Hybox® 355 EN10219: S355J2H Cold formed rectangular hollow section (continued) Size Thickness Mass Approx length /tonne The dimensions shown in silver are standard sizes and should be given preference All other sizes are non-standard and therefore minimum order quantities may apply

Care has been taken to ensure that the contents of this publication are accurate, but Tata Steel Europe Limited and its subsidiaries do not accept responsibility or liability for errors or information that is found to be misleading. Copyright 2010 Tata Steel Group Tata Steel PO Box 101 Weldon Road Corby Northants NN17 5UA United Kingdom T: +44 (0)1536 404561 F: +44 (0)1536 404111 marketing@tatasteel.com English Language TST03:2000:UK:10/2010