KGRR
1 / 17Páginas

Excertos do catálogo

Round duct compact grillekgrr Ferdinand Schad KG SleigstraBe 25-27 t i u D-78600 Kolbingen TeFephonie +49 (0) 74 63 - 980 - 0 Fax +49 (0)74 63 - 980 - 200 m1o@schako.de www.schako.de

Abrir o catálogo na página 1

01/04 - 2 Construction subject to change. Version: 02.04.2020 No return possible!

Abrir o catálogo na página 2

Round duct compact grille type KGRR Description In modern architecture, sheet metal and spiral ducts of air-conditioning systems are often incorporated in the design of the room. Emphasis is often placed deliberately on parts of the supply system. In this visible installation of the ventilation ducts, it is a good idea to integrate the air diffusers into the ducts. The round duct compact grille type KGRR is suitable for installation in supply or return air systems. The air volume throughput can be regulated by using an integrated hit-and-miss damper. The integrated hit-and-miss damper...

Abrir o catálogo na página 3

Round duct compact grille type KGRR Correction factor (for scattered air jet) with or without coanda effect The angle of propagation of the air jet and thus the length of throw can be affected by adjusting the vertical air deflection blades. Construction subject to change.

Abrir o catálogo na página 4

Available sizes Round duct compact grille type KGRR Dimensions KGRR-08-...-6U-... All combined lengths and nominal widths available! x = available Accessories only available for up to NW500 (see documents for round duct system RR-COMPLETE or accessories for round duct systems). Accessories Detail X Rubber lip seal (-GD1) Construction subject to change.

Abrir o catálogo na página 5

Round duct compact grille type KGRR Division of length 1-part: Length 500

Abrir o catálogo na página 6

Round duct compact grille type KGRR Technical data Pressure loss and noise level Supply air face velocity 1,5 vstirn (m/s) Hit-and-miss damper position OPEN in % Construction subject to change.

Abrir o catálogo na página 7

Round duct compact grille type KGRR Return air face velocity Hit-and-miss damper position OPEN in % 01/04 - 8 Construction subject to change. Version: 02.04.2020 No return possible!

Abrir o catálogo na página 8

Round duct compact grille type KGRR FQ in m2 at the hit-and-miss damper Construction subject to change.

Abrir o catálogo na página 9

Round duct compact grille type KGRR Maximum end velocity of jet Supply air without coanda effect Supply air with coanda effect 01/04 - 10 Construction subject to change. Version: 02.04.2020 No return possible!

Abrir o catálogo na página 10

Round duct compact grille type KGRR Jet path Supply air without coanda effect Heating Cooling Critical throw Supply air with coanda effect 01/04 - 11 Construction subject to change. Version: 02.04.2020 No return possible!

Abrir o catálogo na página 11

Round duct compact grille type KGRR Maximum penetration Max. vertical penetration (in heating mode): 01/04 - 12 Construction subject to change. Version: 02.04.2020 No return possible!

Abrir o catálogo na página 12

Round duct compact grille type KGRR Temperature and induction ratios Supply air without coanda effect Supply air with coanda effect 01/04 - 13 Construction subject to change. Version: 02.04.2020 No return possible!

Abrir o catálogo na página 13

Round duct compact grille type KGRR Legend Vzu (m3/h) [l/s] = Vx (m3/h) [l/s] = Vab (m3/h) [l/s] = vmax (m/s) = Supply air volume total air jet volume at point x Return air volume Maximum end velocity of jet Duct velocity Intake velocity, blower stream velocity, outflow velocity, relative to Astirn Face area horizontal throw Critical throw Vertical throw Maximum penetration in heating mode Critical throw Density Pressure loss A-weighted sound power level (Lwa = lwai + KF) Temperature difference between air supply and room temperature in heating mode (ATOH = tZUH - tRH) Supply air...

Abrir o catálogo na página 14

Round duct compact grille type KGRR Order code KGRR 01 All fields must be filled when ordering Round duct compact grille type KGRR I with horizontal, pivoting air deflection blades on the front side and with hit-and-miss damper I nominal width 200 mm | length 1000 mm | grille height 115 mm | blade position straight | sheet steel | painted to RAL colour 9010 (white) | mounting position 6 o'clock | without rubber lip seal | with riveting nut 04 - Length 0500 = Length 500 mm (1-part) 0750 = Length 750 mm (1-part) 1000 = Length 1000 mm (1-part) 1500 = Length 1500 mm (2-part) 1750 = Length 1750...

Abrir o catálogo na página 15

Round duct compact grille type KGRR 08 - Paint 0000 = Without paint 9010 = RAL colour 9010 (white, standard) SAND = Painted in the colour sand silver (always for V2A) xxxx = RAL colour can be freely selected (always with 4 digits) 09 - Mounting position 3U =3 o'clock 6U =6 o'clock (standard) 9U = 9 o'clock 0U =12 o'clock 10 - Rubber lip seal GD0 = Without rubber lip seal (standard) GD1 = With rubber lip seal 11 - Riveting nut E0 = Without riveting nut EM = With riveting nut (standard) Construction subject to change.

Abrir o catálogo na página 16

Round duct compact grille type KGRR Specification texts Round duct compact grille type KGRR for supply and return air suitable for connection to DIN ducts. With integrated, manually adjustable hit-and-miss damper made of galvanised sheet steel or stainless steel V2A (produced of the same material as the round pipe) for air volume regulation. - With horizontal front side adjustable air deflection blades. Product: SCHAKO type KGRR-08-... - Round duct and blades made of - Sheet steel painted to RAL 9010 (white) (-SB-9010) - Sheet steel painted to a RAL colour of your choice (-SB-xxxx) -...

Abrir o catálogo na página 17