FLAQ
1 / 11Páginas

Excertos do catálogo

07/08 - 2 Construction subject to change. Version: 23.09.2019 No return possible!

Lint separator FLAQ Description To separate textile fibre from the return air of clean rooms, in particular operating theatres and their adjoining rooms, a lint separator is used. The separation takes place directly at the extraction point. As a component of the ventilation installation, the separator is mounted in the exhaust air outlet flush with the operating theatre wall or in overflow openings. This protects the air-conditioning ducts and the downstream filters by separating fibre particles in the operating theatre area and allows an economic and smooth operation of the ventilation and...

Abrir o catálogo na página 3

Lint separator FLAQ Models and dimensions Dimensions FLAQ-...-VM-... with SK-Q-19-A-...-S1 Available sizes - SO = spigot from above - S1 = 1 lateral spigot on the box (standard) - S2 = 2 spigots offset by 90° -S3 = 2 spigots offset by 180° - S5 = 2 spigots arranged next to each other Dimensions for spigot position -S0 / -S2 / -S3 / -S5 on request. Minimum height with spigot position -S1 / -S2 / -S3 / -S5 = spigot diameter 0D + 102 mm, but at least 200 mm. See page 5 for detail X. See page 6 for dimensions of SM mounting. Construction subject to change.

Abrir o catálogo na página 4

Rubber lip seal (-GD1), for SK-Q-... Detail X Volumetric flow meter (-VME1), for SK-Q-... (not for use with a damper) Mounting frame design: - without wall anchor (-ER1) (standard) - with wall anchor (-ER2) (only at an extra charge) Mounting frames are only delivered with 4 wall anchors on special request. ROB version (-ROB1), for SK-Q-... (only possible for SK-Q-19-... plenum box) Removable damper and volumetric flow meter Thermal insulation, for SK-Q-... internal (-Ii) external (-Ia) Construction subject to change.

Abrir o catálogo na página 5

Lint separator FLAQ NW Fastening methods SM mounting FLAQ-...-310-SM-... to FLAQ-...-500-SM-... with 4 sash locks Section A-A (Shown with plenum box SK-Q-...) For number and position of sash locks, see SM mounting. FLAQ-...-310-... : with 4 indentations for on-site slotted shallow-raised countersunk-head tapping screws DIN ISO 7051 pitch 3.9 FLAQ-...-400-... to FLAQ-...-625-... : with 4 indentations for on-site slotted shallow-raised countersunk-head tapping screws DIN ISO 7051 pitch 4.8 FLAQ-...-800-... : with 8 indentations for on-site slotted shallow-raised countersunk-head tapping...

Abrir o catálogo na página 6

Lint separator FLAQ Technical data Pressure loss and noise level FLAQ-...-310-... with SK-Q-19-A-... 150- Construction subject to change.

Abrir o catálogo na página 7

Return air volume Return air volume Pressure loss Density A-weighted sound power level Nominal width approximately Construction subject to change.

Abrir o catálogo na página 8

Lint separator FLAQ Order code FLAQ 01 Sample FLAQ-PS-500-A-9010-SM-ER0 Lint separator type FLAQ I perforated sheet steel I NW 500 I return air I frame painted to RAL 9010 (white) I screw mounting I without mounting frame Order details 01 - Type FLAQ = Square lint separator 02 - Model PS = Perforated sheet steel with back-fitted wire fabric made of stainless steel 0.8 mm x 0.5 mm (standard) V2 = Stainless steel (V2A), perforated, with back-fitted wire fabric made of stainless steel 0.8 mm x 0.5 mm 03 - Nominal size 310 = NW310 05 - Frame colour 9010 = RAL colour white (standard for -PS...

Abrir o catálogo na página 9

Lint separator FLAQ Order code SK 01 Sample SK-Q-19-A-500-SM-SB-DK1-GD1-VME1-R0B0-I0-KHS-SDS-S1 Plenum box, square design I for square air diffusers I air diffuser FLAQ I return air I NW500 I with screw mounting I sheet steel painted to RAL 9010 (white) I with damper I with rubber lip seal I with volumetric flow meter I without ROB model I without box insulation I standard height of plenum box I standard spigot diameter I 1 lateral spigot Order details 01 - Plenum box SK = Plenum box, square design 02 - Model Q = for square air diffusers 03 - Air diffuser (must be ordered separately) 19 =...

Abrir o catálogo na página 10

Specification texts Lint separator for filtering textile fibre charged return air from clean rooms, consisting of a square frame and a fitted, replaceable lint separator insert made of sheet steel painted to RAL 9010 (white) (-PS-9010), sheet steel painted to RAL colour which can be freely selected (-PS-xxxx) or stainless steel 1.4301 (V2A) sand silver painted (-V2-SAND), with back-fitted wire fabric made of stainless steel 1.4301 (V2A), mesh width 0.8 mm x 0.5 mm. For cleaning and disinfection purposes, easy to disassemble by turning the sash lock. Product: SCHAKO type FLAQ-... Fastening:...

Abrir o catálogo na página 11