FKW
1 / 16Páginas

Excertos do catálogo

07/07 - 2 Construction subject to change. Version: 22.03.2018 No return possible!

Description The particle filter unit, type FKW, has been particularly developed for use in cleanrooms required by the pharmaceutical, electronical, precision mechanical and optical industry in hospitals and laboratories. The integrated particle filter (to DIN EN 1822) removes particles, radioactive dust, mist, bacteria, viruses, etc., from the supply or return air. This ensures that the incoming and outgoing air flows are extremely clean and germ-free. The filter box type FKW consists of electrolytically galvanised sheet steel painted to RAL 9010 (white). A filter pressure device in the...

Abrir o catálogo na página 3

Particle Filter Box FKW Accessories Seal leakage monitoring system (-P1) - inside the box for filters with U seal only Differential pressure device / aerosol monitoring device additionally with 2 measuring spigots on the box outside for a hose with an inner diameter of 4 mm (-D2) Differential pressure device / aerosol monitoring device additionally with 2 measuring spigots on the box outside for a hose with an inner diameter of 4 mm and an aerosol feeding device in the spigot from the box inside (-D3) Differential pressure device / aerosol monitoring device additionally with an aerosol...

Abrir o catálogo na página 4

Particle Filter Box FKW Models and dimensions Dimensions Air diffusers: Ventilation grille type AL2 Air diffuser type DBB-A Mounting bracket with long hole ø 10 x 20 Mounting bracket with long hole ø 10 x 20 07/07 - 5 Construction subject to change. Version: 22.03.2018 No return possible!

Abrir o catálogo na página 5

Mounting bracket with long hole ø 10 x 20 Mounting bracket with long hole ø 10 x 20 Attention! With modified connecting piece, a motor cannot be fitted to the shut-off damper! 07/07 - 6 Construction subject to change. Version: 22.03.2018 No return possible!

Abrir o catálogo na página 6

Connection flange suitable for Metu systems HM 20 and HM 30 Mounting bracket with long hole ø 10 x 20 Mounting bracket with long hole ø 10 x 20 Internal differential pressure measuring / aerosol monitoring device (-D1, standard) Section A-A 07/07 - 7 Construction subject to change. Version: 22.03.2018 No return possible!

Abrir o catálogo na página 7

“HAk#Particle Filter Box FKW Dimensions of accessories Differential pressure device / aerosol monitoring device additionally with 2 measuring spigots on the box outside for a hose with an inner diameter of 4 mm (-D2) Seal leakage monitoring system inside the box (-P1) (only possible with U seal) Differential pressure device / aerosol monitoring device additionally with 2 measuring spigots on the box outside for a hose with an inner diameter of 4 mm and an aerosol feeding device in the spigot from the box inside (-D3) Differential pressure device / aerosol monitoring device additionally with...

Abrir o catálogo na página 8

Particle Filter Box FKW Filter assembly instruction Maintenance In addition to keeping machines and equipment clean, the maintenance of the filters is especially important. A constant control of the filters is as essential as changing them when the maximum allowed particle absorption has been reached. The inspection must take place at short enough intervals to allow faults that have occurred or become apparent to be eliminated in time. The necessary intervals are set depending on the local conditions. The measured variable for the particle intake of the filter is the pressure difference....

Abrir o catálogo na página 9

Particle Filter Box FKW Technical data Pressure loss An H13 filter unit cannot be used as H14 filter! If the particle filters are designed according to filter class H14, make sure that the air volume at the front plates is checked. Thus, it may happen that the air volume is too low for the selected faceplate, resulting in an uncontrolled jet drop. In this case, we recommend using a faceplate with a smaller perforation. Filter class according to DIN EN 1822 Filtration efficiency in MPPS: H13 = > 99.95 % H14 = > 99.995 % Allowed final pressure: max. 500 Pa Construction subject to change.

Abrir o catálogo na página 10

Attention! - Connection via safety transformer. - Parallel connection of further drives is possible. Observe specifications. Connection diagram E002 / E031 OPEN/CLOSED control N L 230 VAC M) N L L Attention! - Connection via safety transformer. - Parallel connection of further drives is possible. Observe specifications. Construction subject to change.

Abrir o catálogo na página 11

ICHAKO KLIMA-LUFT Technical data of motorsLM24A (-E001) / LM24A-S (-E030) (make Belimo) LF230 (-E020) / LF230-S (-E036) (make Belimo) rated voltage: Functional range : Power consumption : Dimensioning : Torque : Running time : Sound power level: Protection class : Degree of protection : EMC: 24 V AC/DC, 50/60 Hz 19.2...28.8 V AC/DV - Operation: 1 W - Idle position: 0.2 W 2 VA Min. 5 Nm 150 s 35 dB (A) III Safety extra low voltage IP54 in all mounting positions CE according to 89 / 336 / EEC rated voltage: Functional range : Power consumption : Torque : Running time : Sound power level:...

Abrir o catálogo na página 12

ICHAK#Particle Filter Box FKW Order code FKW 01 Sample FKW-1-H-DBB-MB-SB-9010-AB0-M000-D1-U0-P1-GD1-KHS-SDS Particle filter box type FKW I filter height 90 mm I connection from above with round spigot I air diffuser DBB I magnetic fastening I sheet steel I painted to RAL9010 I without antibacterial coating I without shut-off damper I with differential pressure / aerosol monitoring device inside I without differential pressure transducer I with tight seal test I with rubber lip seal I height of plenum box standard I spigot diameter standard Order details 01 - Type FKW = Particle filter box...

Abrir o catálogo na página 13

Particle Filter Box FKW 10 - Differential pressure / aerosol monitoring device D1 = with differential pressure / aerosol monitoring device inside (standard) D2 = with differential pressure / aerosol monitoring device inside and with pressure take-off point filter / room outside D3 = with differential pressure / aerosol monitoring device inside, with pressure take-off point filter / room outside and aerosol monitoring inside the box (spigot) D4 = with differential pressure / aerosol monitoring device inside and aerosol monitoring inside the box D5 = with differential pressure / aerosol...

Abrir o catálogo na página 14