Catálogos >
SCHAKO KG >
COMBIDSC

COMBIDSC
1 / 26Páginas

Excertos do catálogo

Technical documentation SCHAKO | Ferdinand Schad KG Steigstrasse 25-27 D-78600 Kolbingen

COMBIDSC TECHNICAL DOCUMENTATION Function and use | Models FUNCTION AND USE COMBIDSC-2-... COMBIDSC-4-... COMBIDSC-...-ZA COMBIDSC-...-R0 COMBIDSC-...-S0 COMBIDSC-...-P0 COMBIDSC-...-V COMBIDSC -...-S COMBIDSC-...-N COMBIDSC-...-B COMBIDSC-...-ASK COMBIDSC-...-BS... COMBIDSC is a combined slot diffuser for supply and return air in one housing. The slot diffuser consists of supply air slots for introducing the supply air into the room and return air slots for extracting the return air. The introduction of the supply air is carried out by means of high induction via adjustable blades and is...

Abrir o catálogo na página 2

COMBIDSC TECHNICAL DOCUMENTATION Mounting | Blade position for air jet MOUNTING Permanent connection (-FV, standard) -- Only possible with plenum box. -- Standard for the models COMBIDSC-R0 / COMBIDSC-S0 and COMBIDSC-P0. -- The slot diffuser is permanently connected to the plenum box. Concealed mounting (-VM) -- Only possible with plenum box. -- Possible for the models COMBIDSC-R0 / COMBIDSC-P0 and COMBIDSC-S0-Z1 / -Z2 (with additional profile). -- Not possible for the models COMBIDSC-S0-Z0 / COMBIDSC-S0-Z3. -- The slot diffuser is screwed to the pole brace in the plenum box housing with...

Abrir o catálogo na página 3

COMBIDSC TECHNICAL DOCUMENTATION Processing | Accessories Frame surface -- Natural colour anodised aluminium (-ELOX, standard). -- Painted aluminium: - RAL 9006 (white aluminium) (-9006). - RAL 9010 (white) (-9010). - Aluminium painted to a different RAL colour (at an extra charge) (-xxxx) Blade colour -- Supply air with blade made of plastic material (hard PVC) / return air with perforated blade made of painted sheet steel: - Blade colour similar to RAL 9005 (black, standard) / perforated plate painted to RAL 9005 (black) (-L9005). - Blade colour similar to RAL 9006 (white aluminium,...

Abrir o catálogo na página 4

TECHNICAL DOCUMENTATION Dimensions of frame profile | -- Insulation: - Without insulation (-I0) - With box insulation outside (-Ia), thermal insulation at the outside of the plenum box. -- Height of plenum box: - Standard height of plenum box (-KHS) - Height of box in mm, can be freely selected (-xxx) (minimum height = spigot diameter + 47 mm, always with 3 digits) -- Box neck extension: - Standard box neck (-KVS) - Box neck extension in mm, can be freely selected (-xxx) (minimum height = spigot diameter + 47 mm, always with 3 digits) Can only be used with 2-slot models, 4-slot models don't...

Abrir o catálogo na página 5

COMBIDSC TECHNICAL DOCUMENTATION Dimensions of accessories | DIMENSIONS OF ACCESSORIES Plenum box (-ASK-24) Single design (-N) - Length 1000 mm (length of box KL = 993 mm) (-01000-N) - Length 1500 mm (length of box KL = 1493 mm) (-01500-N) - Length in mm, can be freely selected (length of box KL = L -7 mm), possible length L <1000 mm to >400 mm) (-xxxxx-N) Spigot position S0 = spigot from above S1 = lateral spigots on both sides (standard) S2 = lateral spigot on one side Band design (-B) - Length in mm, can be freely selected, as band (-xxxxx-B) (Available lengths according to SCHAKO...

Abrir o catálogo na página 6

TECHNICAL DOCUMENTATION Dimensions of accessories | Plenum box with permanent connection (-FV) The slot diffuser is permanently connected to the plenum box. Standard for the models COMBIDSC-R0 / COMBIDSC-S0 and COMBIDSC-P0. With lateral spigots on both sides (-S1) With spigot from above (-S0) COMBIDSC-2-…-ASK-26-…-FV-S0 Section A-A / supply air Section B-B / return air COMBIDSC-4-…-ASK-26-…-FV-S0 Section A-A / supply air Section B-B / return air 2.) For the table of available sizes, see page 8 For diffuser mounting, detail X, see page 11. For detail Y (rubber lip seal), see page 11. For...

Abrir o catálogo na página 7

COMBIDSC TECHNICAL DOCUMENTATION Dimensions of accessories | For diffuser mounting, detail X, see page 11. For detail Y (rubber lip seal), see page 11. For fastening details, see page 18. For the band design, see page 15. 1.) Partition plate 2.) Foam Construction subject to change No return possible Version: 2020-07-24 | Page 8

Abrir o catálogo na página 8

TECHNICAL DOCUMENTATION Dimensions of accessories | Plenum box with concealed mounting (-VM) The slot diffuser is screwed to the pole brace in the plenum box housing with concealed screws. Possible for the models COMBIDSC-R0 / COMBIDSC-P0 and COMBIDSC-S0-Z1 / -Z2 (with additional profile). Not possible for the models COMBIDSC-S0-Z0 / COMBIDSC-S0-Z3. With lateral spigots on both sides (-S1) With spigot from above (-S0) COMBIDSC-2-…-ASK-26-…-VM-S0 Section A-A / supply air Section B-B / return air COMBIDSC-4-…-ASK-26-…-VM-S1 Section C-C COMBIDSC-4-…-ASK-26-…-VM-S0 Section A-A / supply air...

Abrir o catálogo na página 9

COMBIDSC TECHNICAL DOCUMENTATION Dimensions of accessories | With lateral spigot on one side (-S2) COMBIDSC-2-...-ASK-26-...-VM-S2 Section D-D / supply air Section E-E / return air For diffuser mounting, detail X, see page 11. For detail Y (rubber lip seal), see page 11. For fastening details, see page 18. For the band design, see page 15. EOB = installation opening width EOL = installation opening length 1.) Partition plate 2.) Foam Construction subject to change No return possible

Abrir o catálogo na página 10

TECHNICAL DOCUMENTATION Dimensions of accessories | Damper (-DK1/-DK2), for ASK -DK1, lateral connection on both sides (-S1, standard) Detail X with long hole ø6.5x10 (-E0, standard): A-A (without slot diffuser) M6 / on site on site with riveting nut M4 (-EM, at an extra charge): At an extra charge, the plenum boxes can be fitted with M4 riveting nuts to facilitate ceiling mounting. M4 / on site -DK1, lateral connection on one side (-S2) -DK2, connection from above (-S0, with cable-operated adjustment) Rubber lip seal (-GD1), for ASK Detail Y Construction subject to change No return possible

Abrir o catálogo na página 11

TECHNICAL DOCUMENTATION Dimensions of accessories | Only possible without plenum box. Suitable for all frame profiles (-R0 / -S0 / -P0). Mounting only possible with clamp strap (-KB, standard) or counter pole brace (-GT). Models: - Without additional profile (-Z0). - With additional profile Z I (-Z1): connection of ceiling panels - With additional profile Z II (-Z2): connection of panelled ceilings - With additional profile Z III (-Z3): connection of ceiling panels. Additional profile Z I (-Z1) COMBIDSC-2 Models: -BS0: without dummy piece (only possible in connection with plenum box). -BS1:...

Abrir o catálogo na página 12