Catálogos >
SCHAKO KG >
Aquaris_KWB

Aquaris_KWB
1 / 20Páginas

Excertos do catálogo

Compact Air-Conditioning ModuleModel Aquaris KWB Ferdinand Schad KG SteigstraGe 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63 - 980 - 0 Fax +49 (0) 74 63 - 980 - 200 info@schako.de www.schako.de

Abrir o catálogo na página 1

11/15 - 2 Construction subject to change. Version: 30.07.2012 No return possible!

Abrir o catálogo na página 2

“HAk#Compact Air-Conditioning Module Model Aquaris KWB Description The compact air-conditioning module Aquaris Silent has been designed for installation in suspended corridor ceilings for the air-conditioning of office rooms. The arrangement of supply air and return air grilles on one side of the room creates a rolling motion with an optimum air flow through the room. The plug-in compact air-conditioning module allows a cost-efficient and quick installation in the suspended ceilings of the corridor areas located next to the rooms to be air-conditioned. This allows full utilisation of the...

Abrir o catálogo na página 3

Compact Air-Conditioning Module Model Aquaris KWB Dimensions of accessories Valves VMP46 Three-way valve having a nominal pressure of 16 bar. Brass housing. External thread connections G...B. Provided with manual adjuster. Electrothermal actuator for valve of 2.5 mm nominal stroke. Including motion and position display. Operating mode 24 V DC. - OPEN/CLOSE function or proportional PWM Valve types Actuator STA219 - Actuator 230 V AC - OPEN/CLOSE function or proportional PWM Actuator STA719 - Actuator 24 V AC - OPEN/CLOSE function or proportional PWM Construction subject to change.

Abrir o catálogo na página 6

ICHAKcfCompact Air-Conditioning Module Model Aquaris KWB Room temperature controller for 2-pipe system Model RCC10 Output for On/Off valve actuator Outputs for three-speed fan Control either by room temperature or return air temperature, as desired Automatic heating/cooling mode switchover Standard, Economy, Antifreeze operating modes or OFF Switchover contact input for remote circuit Control parameters selectable Operating voltage AC 230 V B1 = Return air sensor (temperature sensor QAH11.1) B2 = Changeover sensor (temperature sensor QAH11.1 + changeover assembly kit ARG86.3) M1 = 3-speed...

Abrir o catálogo na página 7

Compact Air-Conditioning Module Model Aquaris KWB Room temperature controller for 4-pipe system Model RCC30 Model RDF30 - Outputs for On/Off valve actuators - Outputs for three-speed fan - Control either by room temperature or return air temperature, as desired - Standard, Economy, Antifreeze operating modes or OFF - Operating mode switchover contact input for remote circuit - Control parameters selectable - Operating voltage AC 230 V - Outputs for 2-point valve drives - Outputs for three-speed fan - Control either by room temperature or return air temperature, as desired - Standard,...

Abrir o catálogo na página 8

Compact Air-Conditioning Module Model Aquaris KWB Connection diagram 2-pipe fan coil unit with / without heating element Digital compact room controller for 2-pipe with/without heating element or 4-pipe fan coil units - Proportional PWM outputs for electrothermal valve actuators 230 V AC - Automatic or manual 3-speed fans - Manual or automatic winter/summer (heating/cooling) selector switch (including QAH11.1 sensor) - Three operating modes: Standard, Economy or Standby mode - Digital input: Operating modes selector switch (for motion detector or open window) - Optional input for return air...

Abrir o catálogo na página 9

“"AK#Compact Air-Conditioning Module Model Aquaris KWB Condensate pump Description The condensate pump is used to remove the water of condensation from the cooling register, in case there is not enough gradient towards the on-site drain system. With alarm message (when water height rises above 27 mm). Technical data Power supply Output Rated current Maximum power Thermal protection Alarm contact Safety measure medium Temperature of the medium Ambient temperature Max. flow Max. pressure difference Max. delivery height Pump type Sound level Dimensions Float switch 230 V-50/60 Hz (230 V-50 Hz)...

Abrir o catálogo na página 10

Compact Air-Conditioning Module Model Aquaris KWB Connection scheme / terminal diagram Condensation water pump type 8 FC on-site: (1) Plenum box (2) cable (3) 630 mA fuse P N Connection to earth (4) Solenoid valve C (5) Compressor NC (6) or Important: The pump is equipped with a C & NC / C & NO (reversible) overflow alarm contact (8 A/250 V). The connecting cable must be selected accordingly. The contact can be used, for example, to switch off a cooling system in which there is a risk of condensate overflow (after a detailed check of the customer specification and the resulting electric...

Abrir o catálogo na página 11

Compact Air-Conditioning Module Model Aquaris KWB Technical data Circuit diagrams Wiring thermo contact, overload protection Applies to motorised valve actuators For thermal actuators, terminals 3 and 6 are not used. Construction subject to change.

Abrir o catálogo na página 12

Compact Air-Conditioning Module Model Aquaris KWB Wiring thermo contact, overload protection, operational and fault message on-site L ON / OFF Potential-free contact white white* yellow / green Room Controller 11/15 - 13 Construction subject to change. blue brown black grey violet orange red min. Version: 30.07.2012 No return possible!

Abrir o catálogo na página 13

Compact Air-Conditioning Module Model Aquaris KWB Wiring for parallel operation N Circuit diagram 1 speed switch + 2 or more fan coils (**) Depending on the switching power of the control device KM1 white (*) white (*) yellow C green blue brown brown black grey violet orange red min. yellow / green white (*) white (*) yellow C green blue brown Speed selector switch brown black grey violet orange red min. yellow / green white (*) white (*) yellow C green brown black grey violet orange red min. yellow / green white (*) white (*) yellow C green blue brown brown black grey violet orange red...

Abrir o catálogo na página 14

Compact Air-Conditioning Module Model Aquaris KWB Mounting information Seals Plenum box Flexible connecting piece 1 Suspend plenum box from ceiling and fasten it to the wall with screws. 2 Screw FCU to plenum box with flexible connecting piece and suspend from ceiling sound-decoupled. 3 Screw diffuser to plenum box by means of concealed mounting (-VM). 11/15 - 15 Construction subject to change. Version: 30.07.2012 No return possible!

Abrir o catálogo na página 15