EVOLIFT
1 / 72Páginas

Flap door Assembly instructions Part number composition and packing Part number composition and packing - Push Charts to select the strength of the system page page page page Folding door Assembly instructions Part number composition and packing Charts to select the strength of the system page 30 page 38 page 40 Parallel opening door - for doors from 360 mm to 440 mm height and for doors from 440 mm to 600 mm height Assembly instructions Part number composition and packing Chart to select the strength of the system page 44 page 54 page 56 Swing opening door Assembly instructions Part number...

EvoLift • Opening systems Flap door

EvoLift - Opening systems - Flap door

- Opening systems - Flap door Assembly instructions Drilling pattern for wooden door. Hinges for doors with soft-close and handles C2_6A99 Hinges for doors with Push opening C2_PA99 (Push hinges) for a more decisive opening C2_4A99 (unsprung hinges) for a softer opening Available fixing systems for the hinge cup: A = wood screw fixing, 48x6 mm drilling P = wood screw fixing, 45x9.5 mm drilling U = wood screw fixing, 52x5.5 mm drilling B = dowel fixing, 48x6 mm drilling R = dowel fixing, 45x9.5 mm drilling W = dowel fixing, 52x5.5 mm drilling Internal cabinet side D = sideways and upper...

Drilling pattern for alu-framed door width min. 45 mm. Hinges for doors with soft-close and handles C2_6A99 Hinges for doors with Push opening C2_PA99 (Push hinges) for a more decisive opening C2_4A99 (unsprung hinges) for a softer opening Available fixing system for the hinge cup: A = wood screw fixing, 48x6 mm drilling P = wood screw fixing, 45x9.5 mm drilling U = woodscrew fixing, 52x5.5 mm drilling D = sideways and upper overlay 11 Internal cabinet side

EvoLift - Opening systems - Flap door Assembly instructions Fixing the system to the cabinet side. Drilling depth 12 mm - Hole diameter ø 5 mm Fitting the door to the cabinet.

Withdraw the safety clip. Lower the door slightly until the safety clip can be easily withdrawn. Adjustment of the system strength. Use a Torx bit T20.

EvoLift - Opening systems - Flap door Assembly instructions Adjustment of the decelerating effect. Adjustment of the opening angle of the door, by cam, from 80° to 92°.

View of the mounted system.

- Opening systems - Flap door Assembly instructions Removal of the door.

- Opening systems - Flap door Part number composition and packing DOOR-SET PACKING SOFT CLOSE System strength: D = weak F = strong Cabinet side: D = right S = left Colour: Q = white L = titanium Cabinet side: D = right S = left 1 System • 1 Mounting plate BAPGM39/16 • Assembly instructions and template for cabinet side drilling • Fixing screws included Components to be ordered separately Hinge for wooden doors or for alu-framed doors 45 mm Hinge for alu-framed doors min. 17 mm max. 24 mm Mounting plate for hinges Support for plate for alu-framed doors min. 17 mm max. 24 mm DLZXBH9 Screws to...

INDUSTRIAL PACKING SOFT CLOSE SR_M78A_SNXXI Cabinet side: D = right S = left System strength: D = weak F = strong Colour: Q = white L = titanium Cabinet side: D = right S = left 8 Systems • 1 Bag with 8 mounting plates BAPGM39/16 • Assembly instructions • Fixing screws included 8 Covers • 1 Bag with 8 cover caps Components to be ordered separately Hinge for wooden doors or for alu-framed doors 45 mm Hinge for alu-framed doors min. 17 mm max. 24 mm Mounting plate for hinges To complete the part number see pages 8 and 9 PACKING Boxes with 300 pcs. Support for plate for alu-framed doors min....

EvoLift • Opening systems Flap door with Push opening

- Opening systems - Flap door with Push opening Part number composition and packing DOOR-SET PACKING PUSH OPENING SR_M78A_SNXXF Cabinet side: D = right S = left System strength: D = weak Colour: Q = white L = titanium Cabinet side: D = right S = left 1 System • 1 Mounting plate BAPGM39/16 • Assembly instructions and template for cabinet side drilling • Fixing screws included Components to be ordered separately Hinge for wooden doors Hinge for alu-framed doors or for min. 17 mm max. 24 mm alu-framed doors 45 mm Mounting plate for hinges Support for plate for alu-framed doors min. 17 mm max....

INDUSTRIAL PACKING PUSH OPENING System strength: D = weak Cabinet side: D = right S = left Colour: Q = white L = titanium Cabinet side: D = right S = left 8 Systems • 1 Bag with 8 mounting plates BAPGM39/16 • Assembly instructions • Fixing screws included 8 Covers • 1 Bag with 8 cover caps Components to be ordered separately Hinge for wooden doors Hinge for alu-framed doors or for min. 17 mm max. 24 mm alu-framed doors 45 mm Mounting plate for hinges Support for plate for alu-framed doors min. 17 mm max. 24 mm To choose the Push and the retaining catch see page 22 Screws to fix the mounting...

EvoLift - Opening systems - Flap door Magnetic Push - Recessed magnetic release device and retaining catches DPMSNB Magnetic catch ø 10 mm, 40 mm length. Packing Boxes 250 pcs. Cartons 1.500 pcs. Packing Boxes 250 pcs. Cartons 1.500 pcs. Adjustable magnetic retaining catch. ø16.6 mm Optional supplementary magnetic catch to increase the holding strength. It must always be used together with the DPM. The suggested position of the DPM is the point of pressure on the door. The DPA can be positioned at any point along the opening edge of the door. ø 10 mm, 40 mm length. Pin-fix striker for...

Release device application Application of the standard magnetic catch. Drill a hole Ø 10 mm and min. 40 mm depth in the top, the side or the base panel of the cabinet. Insert the release device into the hole. Inserted adjustable magnetic catch. The retaining catch DP39 is itself magnetic and together with the magnetism of the release device DPM considerably increase (30%) the holding strength of the door against the cabinet side, thus avoiding accidental openings. For the installation it is necessary to drill a hole ø15 mm and 11 mm depth in the door. 40 min Depth adjustment from -0.5 mm to...