8050L
1 / 5Páginas

resoltech ® resoltech 8050L Hardener 8059 Ultra fast epoxy filler in cartridge - Can be sanded after 30min - Density : 0.79 - CMR components and solvent free - Railway, marine, construction application - Cartridge for use with a standard 2K 400mL 1:1 handgun

RESOLTECH 8050L / 8059 is a ultra fast curing and easy sanding filler. It is a premium choice to substitute polyesters filler. Due to its very fast curing characteristics it is best to use in cartridges and it is particularly suitable for fast repairs of cracks in mould, finishing of small surface defects, caulking between assembly elements... It is compatible with all substrate as wood, steel, aluminium and composites. The specially formulated lightweight epoxy filler may be applied in up to 5 mm on a vertical surface and 10 mm on a horizontal surface in one coat and shows minimal...

Surface preparation : As general rule: all substrates must be sanded, cleaned and dried. - On previously painted surfaces : clean thoroughly to degrease the surface and sand with 80-100 grade paper or remove all previous coatings if in poor condition and prime the substrate. - Steel : prime with ANTICO PRIMER A + B in order to offer a good anticorrosion base. - Aluminum: it is recommended to either follow an etching/passivation process.. - Wood: Prime stable constructions only, with RESOLCOAT 1010 / 1014. - GRP: For osmosis treatment, prime the sanded fibre with 1020L / 102xL in order to...

Potlife, sanding & overcoating (on thickness of 2 mm)

HEALTH & SAFETY Cartridge bi-components : 2 x 200mL TRANSPORT & STORAGE Keep containers sealed and away from heat and cold preferably between 10°C and 30°C in a well ventilated area. Our products are guaranteed in their original packaging (check expiry date on the label). Skin contact must be avoided by wearing protective nitrile gloves & overalls or other protective clothing. Eye protection should be worn to avoid risk of resin, hardener, solvent or dust entering the eyes. If this occurs flush the eye with water for 15 minutes, holding the eyelid open, and seek medical attention. Ensure...