1700 ECO
1 / 5Páginas

resoltech * resoltech 1700 ECO Hardener 1706 ECO Biobased Structural Lamination Epoxy System - 58% biobased on resin part* - 22% biobased on hardener part* - Excellent wetting properties on all reinforcements - For structural composites parts and tools - Room temperature cure & mould release - Tg max up to 98°C *ratio of the number of biobased carbon atoms / the number of total carbon atoms Datasheet V2 - 22.11.2022 / Previous version - 19.10.2022

RESOLTECH 1700 ECO / 1706 ECO is a biobased structural lamination epoxy system to manufacture high performance lightweight structures with glass, carbon, aramid and basalt reinforcements with or without post-curing. RESOLTECH 1700 ECO / 1706 ECO contains no CMR components and complies to the latest REACH European regulation. Thanks to its low viscosity, this sytem is suitable to traditional wet layup, vacuum bagging or under press. It is possible to release the parts from the mould without post-curing. To speed up demoulding a 40°C cure is possible and optimum thermo-mechanical properties...

* Gel time measurements realized with Rheotech® ** Gel time on film measurement realized on rheometer Datasheet V2 - 22.11.2022 / Previous version - 19.10.2022

In order to obtain the maximum thermo-mechanical properties, it is necessary to respect the recommended curing cycle. The table below shows the glass transition temperatures (DSC) according to different curing cycles. Flexion properties on pure resin according to ISO 178 Datasheet V2 - 22.11.2022 / Previous version - 19.10.2022

HEALTH & SAFETY - Plastic jerrycan kit of 1kg + 0.25kg - Plastic jerrycan kit of 4kg + 1g - Plastic drum kit of 20kg + 5kg TRANSPORT & STORAGE Keep containers sealed and away from heat and cold preferably between 10°C and 30°C in a well ventilated area. Our products are guaranteed in their original packaging (check expiry date on the label). Skin contact must be avoided by wearing protective nitrile gloves & overalls or other protective clothing. Eye protection should be worn to avoid risk of resin, hardener, solvent or dust entering the eyes. If this occurs flush the eye with water for 15...