PHOMI & Mapei
1 / 6Páginas

Eco-sustainable building materials PHOMI MCM using MAPEI building products

Recommended MAPEI adhesives for the PHOMI Modified Clay Materials, according to the product typology, for application as wall and floor tiles. Interior Cladding type Substrate type Planipatch PHOMI MCM (thickness 2 - 5 mm)* Cement plaster Ultralite S1 Quick Ultralite S1 Quick Ultralite S1 Quick Planipatch PHOMI MCM (thickness 1 - 2 mm)** Ultralite S1 Quick Ultralite S1 Quick Ultralite S1 Quick Aerated concrete /plasterboard Ultralite S1 Ultralite S1 Quick Ultralite S1 Ultralite S1 Quick Substrate type Cladding type Cement plaster Aerated concrete blocks Ultrabond ECO PU 2K Ultralite S1...

ULTRALITE S1 One-component, high-performance, deformable, lightweight cementitious adhesive with no vertical slip, long open time, Low Dust technology and extremely high yield easy to apply by trowel, for ceramic tiles and stone material Colour: grey and white. Application: N° 4, 5, 6 or 10 notched trowel. EMICODE: EC1 R Plus - very low emission. Storage: 12 months. Consumption: 1.5-2.5 kg/m². Packaging: 15 kg bags. IN COM PLI Pot life of mix: more than 8 hours. Open time:> 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to light foot traffic:...

ULTRABOND ECO PU 2K Two-component, solvent-free, high performance, non-slip polyurethane adhesive with very low emission level of volatile organic compounds (VOC) for ceramic and stone tiles Consumption: 2.5 -5 kg/m². Packaging: 10 kg kit (A:B = 88:12 parts in weight). Open time: 20 minutes. Waiting time before grouting: 12 hours, Set to foot traffic: approx. 12 hours. Ready for service: approx. 7 days. Deformability: good. Colours: grey and white. Application: N° 4 or 5 notched spreader. EMICODE: EC1 R Plus - very low emission. Storage: 12 months. KERALASTIC Two-component, high-performance...

Important Notice: All surfaces must be cured, dry, cohesive, free of dust, grease, oils, corrosion, paint, glue residues and gypsum at the time of application. The substrate moisture must not exceed 3%, for gypsum substrates must not exceed 0.5%. Expansion field recommended size: 9-16m² for the exterior, 25m² for the interior application. In exterior the expansion joint should be filled with Mapesil LM, neutral silicone sealant. Cement plaster must be cured and dry (curing time min. 1 week / 1cm layer thickness), min. surface layer adhesion 1.0 N/mm². Monolithic reinforced concrete...

PHOMI MCM, s. r. o. EMEA Headquarters HQ, warehouse & showroom: Dlouhá 888/15 370 01 České Budějovice Phone: + 420 774 324 969 www.phomi.eu MAPEI, spol. s r. o. HEADQUARTERS AND WAREHOUSE Smetanova 192/33 779 00 Olomouc Phone: +420 585 201 151 Fax: +420 585 207 229 www.mapei.cz e-mail: info@mapei.c