s83 bench
1 / 5Páginas

Above and right, s83 polished granite bench with micro porous stain to wood. description Cut granite ends with 316 grade stainless steel frame and treated iroko timber. dimensions Length 2000mm, width 540mm, height 460mm. options Polished, bush hammered or flamed finish to granite. Unfinished timber or micro porous stain. 460 street furniture designers and manufacturers

(for areas already paved) 1 Determine the location for the bench. Remove the pavers and excavate two holes at centres 1830mm to minimum dimensions of L600 x W600 x D400mm.The size of the foundations may vary depending on the ground conditions. 2 Fill the holes with 35N20 concrete up to 15mm below the level of the underside of the pavers ensuring a good smooth surface finish. 3 Allow sufficient time for the concrete to set then apply a layer of dry sand/cement mix over the pad. Compact and adjust to bring this to the level of the underside of the paving. 4 Replace the paving slabs and ensure...

s83 Care and Maintenance Guidelines The s83 bench is constructed from granite, 316 grade stainless steel and iroko hardwood. The materials have been selected for their excellent outdoor durability as well as their aesthetic properties. The timber components have had a micro porous woodstain factory applied as a means of preserving the rich colour of the timber and maximising longevity. Some care is required to maintain the product’s original appearance. The extent to which maintenance is required will depend on a number of factors including environmental conditions, construction activity...

Wood Finishes Below shows Iroko timber with factory applied micro-porous stain. This finish offers very good resistance to UV rays and provided the coating surface does not become broken the colour will not fade for several years. The coating is however vulnerable to conditions where high moisture and severe cold persist. Such conditions can cause the coating to blister and lift. Where maintenance is required the surface can be re-coated using a brush on version of the coating. Omos provide maintenance instructions for all products. Below shows Iroko timber untreated and freshly sanded. The...

Each of the pieces shown above are Granite ref. G603, also referred to as Light Grey. The finishes are as follows: 1 Polished A polished finish gives the stone reflective properties. When viewed straight on, with no reflections, it appears slightly darker than the other finishes. 2 Flamed A flamed finish has a lightly textured surface. As the name suggests it is achieved by passing a flame across the surface causing the surface to flake leaving a random textured finish. 3 Bush Hammered Like the flamed finish a bush hammered finish is also textured though it is courser. The finish is...