VPM 120-560 brochure
1 / 6Páginas

Nilan VPM 120-560 Active heat recovery and cooling (air/air)

Nilan VPM 120-560 Industrial ventilation with heat recovery and cooling The VPM 120-560 units are tested heat recovery units with cooling developed for industrial and comfort ventilation for air requirements of up to 5,600 m³/h. Function The Nilan VPM 120-560 units are active heat recovery units with cooling that extract warm, damp air and inject temperate air. This means that particles, odours and dampness are removed and a comfortable indoor climate achieved. The energy in the extracted air is recovered and transferred to the injected air via a combination of passive heat recovery and a...

Ventilation promotes performance in the workplace Technical specifications: Main dimensions excl. connection pieces LxWxH excl. base Total weight without packaging Power supply Voltage About indoor climate The Danish Working Environment Authority says: "A poor indoor climate in the workplace can and must be prevented. Rules, norms and standards have been set out for indoor climate conditions. A poor indoor climate can result in e.g. feeling unwell, irritated mucous membranes, headache and fatigue among employees. These are symptoms that reduce employees' quality of life and increase their...

Heating output Heat output is based on an extraction air temperature of 20 °C, and a nominal air volume of 1,200 m3/h, 2,400 m3/h 3,600 m3/h, 4,800 m3/h, and 5,600 m3/h respectively. ■ VPM 120 + HP ■ VPM 240 + HP ■ VPM 360 + HP ■ VPM 480 + HP ■ VPM 560 + HP Cooling output The cooling output is based on an extraction temperature of 25°C/50% RH and a nominal air volume of 1,200 m3/h, 2,400 m3/h and 3,600 m3/h respectively, (total cooling performance) Operating economy The Nilan HP heat pipe is a closed evaporator/condensation circuit which transfers energy from the extracted air to the...

Facts: • Cooling function • Heat recovery • Renews up to 5,600 m3 per hour (at 350 pascal) • Injection and extraction • Temperature efficiency up to 94% • Option of supplementary heat using water or electrical heating surface • Duct connections 500x600 diameter 500 mm / diameter 400 mm / diameter 315 mm Advantages: • No damp problems or odours • Fresh air supply and extraction of contaminated air • High recovery • Low operational consumption due to heat pipe Options: All data at nominal air volume and fresh air at 4°C and 0% RH. VPM 120: Renews up to 1,200 m3/h (at 250 Pa) Temperature...

Dimensioned drawing: NILAN-outstanding indoor climate Nilan A/S Nilanvej 2 DK-8722 Hedensted Tel. +45 76 75 25 00 Fax +45 76 75 25 25 nilan@nilan.dk www.nilan.dk the dimensioned drawing shown is a left version: injection on left seen from operator side. the system is also available in a right version: injection on right seen from operator side.