Heating Elements
1 / 8Páginas

I HEATING ELEMENTS BY NILAN ^ NILAN OUTSTANDING INDOOR CLIMATE

Product description Counterflow heat exchangers with high peak temperature efficiency, may incur icing-up during periods of frost. The controls of Nilan aggregates have a built-in de-icing function; however, during de-icing periods, a temperature drop might be experienced in the home. In addition, the heat recovery will be limited during these periods. To ensure constant heat recovery, a pre-heating element can be installed. This will ensure that the counterflow heat exchanger will not ice-up and temperature drops are avoided to ensure a higher comfort level for residents. The table below...

Range Art.no. Power supply Dimensional drawing Electric pre-heating element with temperature sensor The fitter should ensure that there is a safe distance of at least 15 cm between the electric heating element and any inflammable meterial. The heating element must be insulated using fire-resistant insulation material.

Product description In order to ensure a constant air in-flow temperature, or to increase the temperature provided by the aggregate upon heat recovery, a heating coil may be necessary. Nilan offers a wide range of electrical heating coils for both round and square ducts. The heating coils are controlled via the integrated CTS control in Nilan's aggregates with a 0-10V signal. The heating elements are only intended to heat air. There is no need for special servicing of the heating element. Check once a year that the power connection is in order. Calculation of correct pre-heating element At...

I ELECTRICAL HEATING BY NILAN The fitter should ensure that there is a safe distance of at least 15 cm between the electric heating element and any inflammable meterial. The heating element must be insulated using fire-resistant insulation material.

R HEATING Product description In order to ensure a constant air in-flow temperature, or to increase the temperature provided by the aggregate upon heat recovery, a heating coil may be necessary. Nilan offers water heating coils for incorporation in aggregates and water heating coils for external installation. The heating coils are connected to the primary heat supply and controlled by the integrated CTS control in Nilan aggregates with a 0-10V signal.

Capacity water heating element WATER HEATING BY NILAN Water side Temperature input/output [°C] Pressure drop Pressure drop over WHE* [Pa]

BRUGERVEJLEDNING CTS602 LIGHT BY NILAN Product data General information about the solution and its benefits. Technical information to ensure correct choice of solution. Detailed guide for installation and initial adjustment of the solution. User manual Detailed guide for regulation of the solution to ensure optimum day-to-day operation. Tender documents and 3D drawings are available to download for planning purposes. Visit us at www.nilan.dk to find out more about our company and solutions, download further information and find your nearest dealer. Installation instructions Nilan A/S...