Nikobus
1 / 39Páginas

Illuminating ideas.

Home automation Nikobus is an intelligent control system that operates the entire electronic installation in your home. Functions can be programmed manually or from your PC. A d v a n ta g e s •  programming manually or by pc •  all functions such as switching, dimming, shutter control •  connection to the wireless system •  free topology •  modules automatically take over the powering •  logical switchings •  calendar, timer program •  control via bus push button, RF, IR •  simple connection •  all functions are available in the new ranges •  he printed circuit boards can be mounted both...

NIKOBUS MODULES Switching module The switching module is provided with prewired, separated circuits with relays. The 12 output contacts are used for switching electrical appliances. You can choose from 13 user functions, i.e.: switch (on/off), push button, teleruptor or atmopsheres. Per bus push button function, you can choose from 16 adjustable run times and 3 control times. The module is provided with two 230V inputs, 3 outputs for feedback via LEDs and diagnosis reporting. Manual control of the outputs is possible. The switching module is provided with a built-in power supply for a...

nals: per terminal, max. 2 x 1.5mm² • outputs: 12 x 0-10V, 2mA outputs per terminal, max. 4 x 1.5mm² or 2 x 2.5mm² • mounting: the modules can be mounted both centrally and decentrally in a distribution box • dimensions: 4U • non-volatile EEPROM memory • CE approved Complete unit Complete unit EEPROM memory for Nikobus dim controller Compact dim controller The dim controller is provided with 4 voltage driven 0-10V outputs. These outputs each control one or more power dimmers. The control in the connected dimmers is galvanically isolated. Every 0-10V compatible dimmer with galvanically...

Shutter module NIKOBUS MODULES The shutter module is provided with 2 prewired, separated circuits with each 3 x 2 relay outputs. The outputs control motor driven systems, such as shutters, curtains or sun awnings. You can choose from 7 user functions. Per bus push button function, you can choose from 16 adjustable run times and 3 control times. The dim controller is provided with two 230V inputs and diagnosis reporting. Manual control of the outputs possible. Fixed changeover delay of 0.5s. The shutter module is provided with a built-in power supply for a complete Nikobus installation. •...

NIKOBUS WALL-MOUNTED PRINTED CIRCUIT BOARDS Simple wall-mounted printed circuit board with bridge For connection of a simple or double bus push button in an existing flush mounting box or for use on very uneven surfaces. In case of renovation, several wall-mounted prints with bridge can be clicked together if existing flush mounting boxes are used. The wall-mounted printed circuit board with bridge can be combined with all other Niko flush mounting appliances. • connector: 4-pole • bus push button mounting: click mechanism • wall attachment: screws or claws Complete unit Simple wall-mounted...

NIKOBUS WALL-MOUNTED PRINTED CIRCUIT BOARDS Connection unit for Nikobus wall-mounted printed circuit boards Connects the bus with the wall-mounted printed circuit board. Can be placed in any position in case of multiple circuit boards. The connection unit is required for the wall-mounted printed circuit boards (not in case of 450-00020 and 450-00021). Complete unit Connexion unit for wall-mounted printed circuits boards Set of claws for connection unit

BUS PUSH BUTTONS WITH 2 CONTROL KEYS 2 control keys In the Nikobus system, the bus push buttons are information transmitters. The Nikobus push button does not require any programming. Each bus push button has a unique address. The bus push button is fixed to the wall-mounted printed circuit board via a click mechanism. Contact springs provide the connection between the bus push button and the wall-mounted printed circuit board. This bus push button enables the activation of 2 controls. The keys must be ordered separately. • ambient temperature: 0 to 50°C • bus connection: 9V DC (SELV,...

BUS PUSH BUTTONS WITH 2 CONTROL KEYS 2 control keys + 1 LED In the Nikobus system, the bus push buttons are information transmitters. The Nikobus push button does not require any programming. Each bus push button has a unique address. The bus push button is fixed to the wall-mounted printed circuit board via a click mechanism. Contact springs provide the connection between the bus push button and the wall-mounted printed circuit board. This bus push button enables the activation of 2 controls. The feedback is connected to the additional connection terminals on the switch module 05-000-02....

BUS PUSH BUTTONS WITH 2 CONTROL KEYS 2 control keys with 2 feedback LEDs In the Nikobus system, the bus push buttons are information transmitters. The Nikobus push button does not require any programming. Each bus push button has a unique address. The bus push button is fixed to the wall-mounted printed circuit board via a click mechanism. Contact springs provide the connection between the bus push button and the wall-mounted printed circuit board. This bus push button enables the activation of 2 controls. Feedback via the feedback module 05-207. The keys must be ordered separately. •...

BUS PUSH BUTTONS WITH 2 CONTROL KEYS 2 control keys with IR receiver In the Nikobus system, the bus push buttons are information transmitters. The Nikobus push button does not require any programming. Each bus push button has a unique address. The bus push button is fixed to the wall-mounted printed circuit board via a click mechanism. Contact springs provide the connection between the bus push button and the wall-mounted printed circuit board. This bus push button enables the activation of 2 controls. The keys must be ordered separately. • ambient temperature: 0 to 50°C • bus connection:...