

Excertos do catálogo

geotextile introduction
Abrir o catálogo na página 1
Introduction Since the early 1960's, nonwoven geotextiles have been used in various fields of civil engineering for separation, filtration, protection and drainage applications. Since then, numerous national and international guidelines have been published that enable project-specific specifications and product selection, based on established performance requirements. Nonwoven geotextile manufacturing The basic characteristics of a nonwoven geotextile can be categorised by the geotextile structure, the bonding method and the raw material - the most prevalent of which are polypropylene (PP)...
Abrir o catálogo na página 2
Fig. 7 Cone drop behaviour (according to EN ISO 134333) of thermally bonded and needle-punched nonwovens Thickness of geotextile nonwovens [mm] Ojmajt sin ef dropped cone [mm] Mess per unit arte (g/ra'J Filter properties Needle-punched nonwovens are also well suited to filtration applications due to the typical thickness (d) and opening size ratio (O90,w,select) (figure 8), as required in several national filtration calculations. Unique to the manufacturing process, needle-punched nonwovens can be produced in greater thicknesses than other bonded nonwovens. Hence they can be produced in...
Abrir o catálogo na página 3
While this discussion typifies the interface shear characteristics that can be expected, actual performance levels should be predicted through project and product-specific shear tests modelling the conditions of the application. Conclusion Needle-punched (mechanically bonded) nonwovens are robust geotextiles capable of withstanding harsh installation conditions and challenging construction loads. Their unique flexibility and elongation properties combine to provide high puncture resistance without sacrificing frictional of filtration properties. When properly selected, needle-punched...
Abrir o catálogo na página 4Todos os catálogos e folhetos técnicos da NAUE
-
THE WORKING PLATFORM SOLUTION
5 Páginas
-
Secugrid® HS
4 Páginas
-
Combigrid®
4 Páginas
-
Secugrid® PET/PP
4 Páginas
-
CARBOFOL® geomembranes
4 Páginas
-
SECUTEX® Soft Rock
4 Páginas
-
MINING and GEOSYNTHETICS
11 Páginas
-
BENTOFIX® X
4 Páginas
-
BENTOFIX®
4 Páginas
-
BASE COURSE REINFORCEMENT with GEOGRIDS
16 Páginas
-
LANDFILL Engineering
13 Páginas
-
Civil engineering
32 Páginas
-
Tunnel construction
16 Páginas
-
NAUE_Renewable_wind_energy
8 Páginas
-
NAUE Geotechnics with geosynthetics
24 Páginas
-
Secugrid® PDF
3 Páginas
-
Secudrain® PDF
2 Páginas
-
Combigrid® PDF
2 Páginas
-
Bentofix® PDF
3 Páginas
-
Carbofol® PDF
3 Páginas