Catálogos >
MINIB >
COIL – MT2

COIL – MT2
1 / 2Páginas

Excertos do catálogo

MINIB, s. r. o., Støešovická 49, 162 00 Praha 6 CZ, office@minib.cz tel.: +420 220 180 780, +420 604 767 677 fax: +420 220 180 779 60 www.minib.cz COIL - MT2 with a fan CHARACTERISTICS 6 the most universal MINIB convector 6 automatic angle of airflow 6 heating of dry and wet interiors 6 automatic blowing to window surfaces for demisting 6 partial cooling of the space in the summer 6 use possible only with the MT 2 control DIMENSIONS total width 380 mm construction height 140 mm length L 900 to 2000 mm USAGE This convector includes 12 V DC motors with an extremely low power consumption and economical heating is ensured during operation. It uses the newly developed electronic IQ controller MINIB MT-2. This controller includes automatic continuous speed control of the fan (thus the heat output of the convector) via a microprocessor, automatic angle of airflow, user adjustable max. speed level, night speed reduction, user selection of the operation mode, disabling of fan at low water temperature and contactless, noiseless switching of the thermostat. The multifunctional convector enables automatic inclination of airflow with an extremely high heat output at very low speed. (At temperatures of 75/65/20 ºC, the convector achieves a heat output of approx. 1600 W for 1m length at medium speed.). The inclination of the warm airflow to different directions provides (based on the pulse from the sensor) either automatic demisting of steamed up windows by warm air from the convector or intensive heating of objects in the room into the interior by declined airflow. In standard mode, the convector generates the vertical heat curtain providing either heating of the interior or demisting of the window. Thanks to an arrangement of fans the convector can be used for cooling of the space in the summer as the cool air is directed into the room at an angle and not vertically. The fast-acting heat exchanger reacts very quickly to changing requirements and provides user‘s optimum levels of comfort. COIL – MT2 Cooling effect of the convector COIL – MT2: For water flow temperatures of 6/12.C take an estimated cooling output of 300W/per linear metre at speed 2 and approximately 400W per linear metre at speed 3. CROSS SECTION OF COIL-MT2 LONGITUDINAL SECTION COIL-MT2 Window Ø30 90 222 48 131 140 45 49 380 160 162 382 116 Ø18 Ø30

Abrir o catálogo na página 1