Catálogos >
MINIB >
COIL – KTO

COIL – KTO
1 / 2Páginas

Excertos do catálogo

MINIB, s. r. o., Støešovická 49, 162 00 Praha 6 CZ, office@minib.cz tel.: +420 220 180 780, +420 604 767 677 fax: +420 220 180 779 30 www.minib.cz CHARACTERISTICS 6 the narrowest available MINIB floor convector, total width only 106 mm 6 for heating dry interiors DIMENSIONS total width 106 mm construction height 125 mm length L 900 to 3000 mm USAGE The convector COIL – KT0 is MINIB‘s narrowest available floor convector. It is a fast-responding heater from the lower heat output series of MINIB convectors with the 12V fan. Despite the extremely narrow design, the convector can achieve heat outputs of approx. 420 W/m of length. The use is recommended in cases when the extremely narrow profile of the floor convector is required. This convector has been supplied with connection fittings and flexible hoses “3/8” for connection of the heat exchanger since 1st May 2009. info: COIL-KT0 convectors are newly supplied with levelling screws for height adjustment of the convector before concreting but only with the Al transverse grill. coil – kt0 CROSS SECTION OF COIL-KT0 LONGITUDINAL SECTION COIL-KT0 Window where: m= 1,1076 temperature exponent tW, A mean heating water temperature, mean air temperature [ºC] QN nominal heat transfer rate for difference of temperatures tw - tA = 50 ºC [W] Q heat transfer rate for other temperatures [W] TEMPERATURE EQUATION Q = Q ( ) N t m w - ta 50 COIL - KT0 with a fan 42 106 75 30 36 32 125 Ø25 40 93 Ø30 47 114

Abrir o catálogo na página 1