Catálogos >
MAPEI >
ULTRAFLEX S2 QUICK

ULTRAFLEX S2 QUICK
1 / 4Páginas

Excertos do catálogo

One component, highlyflexible, high performance, quick-setting and hydrating cementitious adhesive, which is easy to trowel with no vertical slip and an extremely high yield, for ceramic tiles and stone material CLASSIFICATION IN COMPLIANCE WITH EN 12004 Ultraflex S2 Quick is highly deformable (S2) cementitious (C) improved (2) fast-setting (F) slip-resistant (T) adhesive of class C2FTS2. Ultraflex S2 Quick is CE marked, as declared in ITT certificate n° 25070199/Gi (TUM) issued by the Technische Universität München laboratory (Germany). WHERE TO USE • Bonding of all types (double-fired, single-fired, porcelain, klinker, etc.) and sizes of ceramic tiles on internal and external surfaces. • Bonding of natural stone, which is not sensitive to moisture, to interior or exterior. Some application examples • Bonding of ceramic tiles (double-fired, single-fired, porcelain, klinker, etc.) and stone material (if not particularly sensitive to humidity) on traditional substrates such as: – cementitious and anhydrite screeds; – heated screeds; – cementitious render or lime-mortar render; – plasterboard, pre-fabricated and cement-fibre panels. • Laying on flexible substrates or substrates subject to vibration: marine plywood, wooden agglomerates (if sufficiently stable in the presence of water), old wooden floors, etc. • Quick refurbishment work where immediate installation is required (public buildings, transport cafes, supermarkets, airports and pedestrian areas). • Laying ceramic and stone material on façades, balconies, terraces and slab floors exposed to direct sunlight and temperature gradients. • Laying on pre-fabricated concrete walls and concrete substrates. • Laying in environments (such as hospital entrance halls, school corridors, public buildings, etc.) where impact noise caused by footsteps needs to be reduced, especially if used in conjunction with the Mapefonic System. • Laying ceramic and stone material directly on top of old floors (in ceramic, marble, etc.). • Laying floors and coatings on MAPEI waterproofing and anti-fracture membranes. TECHNICAL CHARACTERISTICS Ultraflex S2 Quick is a grey-coloured powder made up of a blend of special cements, graded sand, a high quantity of synthetic resins and micronised elastomers, according to a formula developed in MAPEI’s own Research Laboratories. When mixed with water, it forms a mortar with the following characteristics: • The innovative Ultralite TechnologyTM provides a low density product whi

Abrir o catálogo na página 1

Example of porcelain gres laid on Mapelastic using Ultraflex S2 Quick 1) weight advantage: 15 kg of Ultraflex S2 Quick weighs less than traditional cementitious adhesives of the same volume. Easier handling and lower transport costs apply; 2) increased yield: yield is approximately 30% more compared with MAPEI’s traditional cementitious adhesives; • low viscosity and, therefore, good workability; • highly thixotropic: Ultraflex S2 Quick may be applied on vertical surfaces without sagging and there is no risk of the tiles slipping. It is also possible to lay the tiles from the top working...

Abrir o catálogo na página 2

CONSUMPTION 0.9 kg/m2 per mm of thickness, equal to 1.5-2.5 kg/m2. STORAGE Ultraflex S2 Quick may be stored for up to 12 months in its original packaging in a dry place. The product conforms to the requirements of Directive 2003/53/CE. SAFETY INSTRUCTIONS FOR PREPARATION AND APPLICATION Ultraflex S2 Quick contains cement that, when in contact with sweat or other bodily fluids, produces a slightly irritant reaction. Wear protective clothing, gloves and eye/face protection. For further information, please refer to the Safety Data Sheet. FOR PROFESSIONAL USE. PACKAGING Ultraflex S2 Quick is...

Abrir o catálogo na página 4