Catálogos >
LITOKOL >
Litonet EVO

Litonet EVO
1 / 2Páginas

Excertos do catálogo

Litonet EVO LIQUID DETERGENT FOR REMOVING MARKING RESIDUES OF EPOXY MORTARS FROM ANY TYPE OF CERAMIC TILES, MOSAICS AND NATURAL STONES. ALSO EFFECTIVE FOR THE DEEP CLEANING OF TOUGH DIRT. Litonet EVO è un detergente liquido concentrato a pH alcalino idoneo per la pulizia di qualsiasi tipo di piastrelle ceramiche anche delicate come ad esempio ceramiche lappate, mosaici vetrosi o ceramici e qualsiasi tipo di pietra naturale anche lucidata. Litonet EVO, having a low viscosity, is suitable for cleaning floors. • Versatile and usable on all surfaces • Water-based product • Non-aggressive solution, which can also be used on polished marble and honed or polished stoneware without the risk of corrosion or tarnishing • Exempt from hazard classification for transport • Excellent degreasing and wax removal power Litonet EVO 1.05 qts. (1 l) bottles (boxes with 12 pcs) 5 l (1.32US gal lqd) cans Il detergente utilizzato puro, non diluito è particolarmente efficace per la rimozione di residui o alonature di malte epossidiche tipo Starlike® EVO, Starlike® Crystal EVO, Starlike® ColorCrystal EVO, EpoxyÉlite EVO e EpoxyÉlite EVO FR, nonché per la rimozione di aloni sul gres porcellanato levigato, macchiato da precedenti stuccature effettuate con sigillanti cementizi di colore scuro. Litonet EVO can also be used as: • Degreasing alkaline detergent: effective in removing greasy residue, organic dirt deposits accumulated over time and wax from all natural or artificial surfaces. In this case, dilute the product to 30% in water • Deep cleaning detergent for porous materials: effective against dirt trapped in the pores of materials such as full surface honed and full body polished porcelain stoneware. Dilute the product to 30% in water • Periodic deep cleaning detergent: effective on all types of surfaces characterized by intense dirt, which cannot be removed using commonly sold detergents • Detergent used to clean resilient flooring such as PVC and linoleum Shake well before use. For the removal of epoxy grout halos or residue, the detergents must be applied once the grouting has sufficiently set (normally after 24 hours at a temperature of +20/+25°C (+68/+77°F)). For fresh residue the product requires less time to work, while for more consolidated residue, the product will need to be left in contact for longer. Apply the pure, undiluted product directly onto the affected surface, spreading it evenly using a special pad or brush. Then rub the surface with white felt (art. 109GBNC) or using a single disk machine with a white disc pad for larger surfaces. It is recommended to mechanically rub the product when applied to facilitate its removal. Collect the cleaning solution using a sponge, rubber squeegee broom or wet vacuum cleaner. Finally, rinse well with clean water and dry with a clean rag or cloth. Do not wait for the rinse water to evaporate as this may cause halos to reappear on the surface. If epoxy grout residue can still be seen after rinsing, repeat the application following the same procedure.

Abrir o catálogo na página 1

Powered by TCPDF (www.tcpdf.org) • Spread the product at temperatures between 40°F and 95°F • Wear protective clothing during handling. Follow the instructions shown on the label and safety sheet • Before use, protect doors, windows, rubber gaskets, furniture, taps and fittings, metal or PVC profiles and all surfaces that may be damaged by direct contact with the detergents • Change the rinse water frequently • In the case of accidental leaks, soak up the product using an absorbent material (paper, sawdust, vermiculite, etc.) and dispose of it in a suitable container • Do not use the...

Abrir o catálogo na página 2

Litonet EVO 1 / 2Páginas

Excertos do catálogo

Todos os catálogos e folhetos técnicos da LITOKOL

Litonet EVO
1 / 2Páginas