Catálogos >
LITOKOL >
Litogap

Litogap
1 / 2Páginas

Excertos do catálogo

Litogap CLOSED-CELL EXPANDED POLYETHYLENE TUBING FOR EXPANSION JOINTS. Closed-cell expanded polyethylene tubing available in different diameters in gray. The product has the following features. ADVANTAGES / FEATURES Ø 1/4" (6 mm) – 100 m (109.3 yd) rolls Ø 3/8" (10 mm) – 100 m (109.3 yd) rolls Ø 15 mm (0.6in) – 100 m (109.3 yd) rolls Ø 20 mm (0.8in) – 50 m (55yd) rolls Ø 1" (25 mm) – 50 m (55yd) rolls Ø 30 mm (1.2in) – 25 m (27yd) rolls Suitable for filling the joints section of interior and exterior horizontal or vertical tiled surfaces prior to the application of elastomeric sealants. The substrates must be clean, solid, compact, crack-free, properly cured and without rising damp. It is recommended to pre-clean the surface with a vacuum cleaner having a suitably sized spout. The diameter of the Litogap tubing must be a few millimeters (fraction of an inch) wider than the width of the joint. The Litogap tubing with suitable diameter is inserted in the joint, applying slight pressure until it reaches the envisaged depth (normally flush with the surface of the substrate). The joint will subsequently be filled with the appropriate elastomeric sealant chosen from the Litokol range. • The size of the joints is defined according to the intended use of the tiled surface, its location and intended movements • The tubing in Litogap must always have a diameter a few millimeters (fraction of an inch) wider than the joint • Do not use the product for applications not stated in this technical sheet • If in doubt, contact the Litokol S.p.A Technical Help Service. SAFETY INFORMATION Based on European Regulations (Reg. 1907/2006/EC - REACH) the product is considered an article and therefore does not require safety data sheets. PRODUCT FOR PROFESSIONAL USE IDENTIFICATION DATA Color Customs code Longitudinal elongation at break (ISO 1926) Longitudinal tensile strength (ISO 1926) Totally non-absorbent of water Retains its features unaltered over time Excellent support for elastomeric sealants since it is extremely elastic The non-stick surface allows the fluid application of elastomeric sealants Special Products

Abrir o catálogo na página 1

Powered by TCPDF (www.tcpdf.org) Specific gravity Serviceability Temperatures Water absorption Shelf life 0.25lb/gal (0.03 kg/dm3) From -40°F to +176°F (-40°C to +80°C) None Unlimited in original packaging in a dry place Data detection at temperature +73.4°F (+23 °C ), R.H. 50% and with no wind. May vary depending on the specific conditions of the installation site. Form n. 518 Revision n. 1 Date: January 2021 The information and provisions contained in this technical data sheet reflect our best experience. Given the impossibility of directly intervening on the conditions of the work site...

Abrir o catálogo na página 2

Litogap 1 / 2Páginas

Excertos do catálogo

Todos os catálogos e folhetos técnicos da LITOKOL

Litogap
1 / 2Páginas