Catálogos >
LITOKOL >
Hydrolux EVO

Hydrolux EVO
1 / 5Páginas

Excertos do catálogo

Hydrolux EVO TWO-COMPONENT TRANSPARENT GLOSSY, SATIN AND MATTE PROTECTIVE FINISH SUITABLE FOR OVERLAYING AND UNDERFLOOR HEATING. FOR INTERIORS. ZHERORISK TECHNOLOGY OFFERS VERY LOW VOLATILE ORGANIC COMPOUND EMISSION RATE. PROTECTION OF THE SURFACE FROM THE PROLIFERATION OF BACTERIA Two-component, aliphatic, water-based, transparent, polyurethane protective finish for the Spaziocontinuo® and Starlike® Decor decorative systems. Available in glossy, satin and matte version which has a different effect on the color and, therefore, on the aesthetic result of the resin system. Satin finish: semi-matte or semi-glossy effect obtained by seeking the perfect balance between mirrored and softly diffused light. Glossy finish: the light mirrors compared to the beam hitting the surface so that the colors appear brighter and shinier. Matte finish: the light is reflected more softly compared to the beam hitting the surface, so the colors appear light and more delicate. ADVANTAGES / FEATURES • Product with very low volatile organic compound (VOC) emission rate, compliant with class A+ (Émission dans l’air intérieur – French Regulations) • Enhances the effects of the underlying textures • Product with excellent fluidity and easy to spread • Simple, fast mixing; does not require the use of mechanical or electrical equipment • No restrictions for transport over road, sea, air and rail • Water-based product • Final protective layer of Spaziocontinuo®decorative systems; makes them resistant to scratches, yellowing and stains • Excellent resistance to intermittent contact with water and humidity • Applicable with roller, brush or airless sprayer • Protects surfaces making non-absorbent, hygienic and safe • If applied on washable painted surfaces, it makes them non-absorbent, resistant to stains and occasional contact with water • Complies with HACCP protocol for the decoration of premises for food use • Ideal for contact with food • If additivated with non-slip additive, it makes the SpazioCemento, SpazioResina, SpazioLamina and ResinaArredo decorative systems slip resistant even in damp environments according to the DIN 51097 standard. Suitable for shower enclosures and walkways in wet environments • Surface protection to avoid the proliferation of bacteria, it can eliminate 99.9% of bacteria after 24 hours according to the ISO 22196 standard and 99.7% of viral load after 6 hours of contact according to the ISO 21702 standard Intended uses Interiors Floors and walls Underfloor heating Overlaying on existing floors and coverings in ceramic, porcelain stoneware, mosaics, agglomerates, natural stones Residential, public, commercial building Indoor wet areas (bathrooms, shower enclosures) Covering of furniture and structures in wood or metal Suitable substrates SpazioCemento EVO - SpazioResina EVO SpazioLamina EVO SpazioChiaroscuro EVO - SpazioMateria EVO SpazioMetallo EVO Neutralizzante EVO Wood or metal substrates Starlike® Decor Washable paints (temperas need to be remove

Abrir o catálogo na página 1

2.2lb (1 kg) bottle part A + 0.44lb (0.2 kg) bottle part B Hydrolux EVO is the ideal solution to make any surface more hygienic In particular, it provides protection from external agents for all Spaziocontinuo® surfaces. Antimicrobial test Thanks to the support of the research and certification of the University of Modena and Reggio Emilia and with the collaboration of the external accredited laboratory ACCREDIA, it has been demonstrated that the surface obtained with Hydrolux EVO is protected from bacterial loads (test according to the ISO 2196 standard on Escherichia Coli, elimination of...

Abrir o catálogo na página 2

Once the second layer has been applied, the floor will be set for light foot traffic after 24 hours while it will be necessary to 4-5 days before use. These time frames are required to allow the entire resin system to cure correctly and completely. • Since the product is based on synthetic resins in aqueous dispersion, it must be protected against frost. When packages are transferred and stored in a warehouse, the temperature must not fall below 40 °F (+5°C) so as not to compromise the quality of the product • Avoid storing the product in cans/buckets under direct sunlight or in very warm...

Abrir o catálogo na página 3

Standard Resistance to abrasion/wear Resistance to knocks/impact Adhesion to substrate Adhesion to substrate Determination of dirt pick-up Resistance to UV rays Contact with food Slip resistance (with non-slip additive) Static load Resistance to water Resistance to temperature fluctuations Resistance to aging CHEMICAL RESISTANCE TABLE UNI EN 13813 - EN 15824 AR 0.5 IR 18 B>2.0 1.5 MPa ≥ 0.3 Mpa (217.5 psi ≥ 43-5 psi) Very low, ∆L < 3 Excellent Suitable A PS2 Excellent (> 72 hours) Excellent Excellent The table provides a summary of the chemical resistance tests performed according to...

Abrir o catálogo na página 4

Powered by TCPDF (www.tcpdf.org) Form n. 1400 Revision n. 0 Date: January 2021 The information and provisions contained in this technical data sheet reflect our best experience. Given the impossibility of directly intervening on the conditions of the work site and execution of the works, they represent indications of a general nature, which are in no way binding on our Company. It is therefore advisable to perform a spot test to check the suitability of the product for the intended use. In any case, users must determine whether or not it is suitable for the intended use and shall assume all...

Abrir o catálogo na página 5

Hydrolux EVO 1 / 5Páginas

Excertos do catálogo

Todos os catálogos e folhetos técnicos da LITOKOL

Hydrolux EVO
1 / 5Páginas