therm-x2 original
1 / 16Páginas

The energy-saving radiator innovation for all modern heating systems.

Kermi offers with its therm-x2 a steel panel radiator innovation, which is unique worldwide and which provides an ideal response to the requirements of the heating technology of the future. Thanks to patented x2 technology, it is ideally suitable even for modern, energy-efficient heat generators. It also gives real energy savings in its heat transmission. Superior in every way, the therm-x2 is the ideal, futureproofed form of heat transmission, which is also the best possible alternative for heating renovation without panel heating. It is not by chance that it was awarded the 'Plus X Award'...

W Highest mean surface temperature of the front panel W Dynamic in every operating situation W The thermographic comparison demonstrates the difference W Lowest mean surface temperature of the rear panel W Optimum use of thermal energy W x2 technology for optimized flow through W Perfect for every installation situation W Large variety of models W Can be used in combination with all heat generators W Suitable for the installation of all types of heating cost measuring devices W Hydraulic balancing, time and energy saving thanks to kv preset valves W Innovative fixing technology, which fully...

The thermographic comparison demonstrates the difference.

Kermi therm-x2 steel panel radiator Kermi therm-x2 steel panel radiator Kermi therm-x2 steel panel radiator Test condition: in the heating-up phase after 15 minutes from cold. Mass flow 108 l/h, flow temperature 75° C

Highest mean surface temperature of the front panel W Maximum radiated heat at every operating point W Maximum comfort Dynamic in every operating situation W Maximum output/heat emission in the shortest time W Optimum reaction to changing ambient conditions in the room shorter heating-up time higher radiated proportion

Highest GHƂEKGPE[ KP every aspect.

Lowest mean surface temperature of the rear panel W Lowest radiated loss through external components at every operating point W Maximum energy efficiency Optimum use of thermal energy W 1RVKOWO ť6 DGVYGGP HNQY CPF TGVWTP HQT OCZKOWO use of the thermal energy of the heating water and for maximum energy efficiency x2 technology for optimized flow through W Smallest pressure drop across all types. For minimum electricity consumption of the circulation pump

Perfect for every installation situation.

Large variety of models W x2 technology in all multilayer versions of the compact, valve and valve center connection series W In profile and plan version W As Verteo vertical steel panel radiator W Also as an exchange solution for old DIN radiators Unique on the market. Only with the original: Complete exchange solutions for all renovation requirements, incl. the compact version.

Can be used in combination with all heat generators W Ideally suited to low-temperature applications in conjunction with heat pumps and to high-temperature applications in the area of district heating Suitable for the installation of all types of heating cost measuring devices W All well-known heat billing companies have determined and listed the installation positions and connection factors for Kermi therm-x2

Hydraulic balancing. Time and energy saving thanks to k v preset valves W The V version of therm-x2 is factory-equipped with a k v preset valve insert W For compact version x-part, the k v preset connection sets W For heating systems with up to 500 m² effective area, there is virtually ideal hydraulic balancing W Meets the KfW subvention requirements for hydraulic balancing W Up to 6 % energy saving W Time saving for designers and installers Save time and energy instead of hydraulic balancing.

Compliant with VDI 6036. For maximum safety. Innovative fixing technology that fully meets the requirements of VDI 6036 W Kermi's range of fixings is geared to high load-bearing capacity, optimum stability and maximum safety W Absolute conformity with VDI 6036 W Outstandingly well constructed for the additional loading in the real surroundings. More peace of mind for designers and installers. W Entirely manufactured in-house Ũ with the know-how of decades of specialist experience

We stand for honest values instead of hot air. Proven and corroborated many times by studies carried out by renowned test institutes. As a convinced craft mark we believe that this is part of our self-concept of having a honest business relation. Studies on x2 technology: W "Dynamic response and energy expenditure of a steel panel radiator with panels connected in series" (Prof. Dr.-Ing. Rainer Hirschberg) W "Valve presetting - adjustment ranges, hydraulic balancing, energy-related assessment“ (Prof. Dr.-Ing. Rainer Hirschberg) W "Evaluation of therm-x2 radiator by means of simulation"...