INCO 70.4 Curved
1 / 2Páginas

INCO 70.4 Curved ® CURVED ROOFING Curved roofing Cover width: 840 mm Height: 70 mm Pitch: 210 mm Manufacturing conditions Description he INCO 70.4 profile is used as a curved support profile for simple or multi-layer self-supporting curved roofs of industrial warehouses, shopping centers, sports facilities, among others. This profile offers very good resistance for different metal enclosure solutions, reaching spans up to 13 meters. Material Steel grade Organic coating Dimensional tolerances Fire reaction Min / Max Manufacturing Length:4 / 14 m Thickness Range: 0,60 | 0,70 | 0,80 | 1,00 | 1,20 mm Minimum Order: 250 m² Package Weight: 1.500 - 2.000 kg Color: White. Others on request Color Position: A Tables information The values in the tables have been obtained by experimental tests and computational analyses These values are an approximation of the load-carrying capacity of the profile Nevertheless, you should request a calculation report for a detailed analysis The maximum horizontal deformation of the roof support structure will be limited to 3 mm (pressure) and 30 mm (suction) These values should be compared with factored load combinations on the horizontal projection The self-weight of the profile is included Example: Thickness 1,20 mm, distance between supports 12,00 m, uniform maximum load 261 kg/m², not uniform maximum load 183 kg/m² Galvanized steel (Z) and Magnelis (ZM) Standard painted steel (15-25 µm) High-performance steel (35-200 µm) Perforated for acoustic solutions Calculation information Calculation hypothesis: ULS: Q= 1,35 x (PP+CP) + 1,50 x SU Q= 1,35 x (PP+CP) + 1,50 x SV + 0,75 x SN Q= 1,35 x (PP+CP) + 1,50 x SN + 0,90 x SV SLS: Q= 1,00 x (PP + CP) + 1,00 x SU Q= 1,00 x (PP+CP) + 1,00 x SV + 0,50 x SN Q= 1,00 x (PP+CP) + 1,00 x SN + 0,60 x SV PP: Self weight | CP: Permanent load SU: Live load | SN: Wind load Comience a diseñar su cubierta curvada * special transport for spans greater than 13 m Complementary articles Cellular polycarbonate sheets Tight Joint Upper/ Lower Trimming Related documents General catalog Technical datasheet Technical manual Declaration of Performance (DDP / DOP) Find on our website all technical documentation what you need to start design your project. Use forms for request a specific report for your project. Request support from our technical department for design and select the system more appropriate. Ingeniería y Construcción del Perfil S.A. C/ Nou 16-27, Polígono Industrial Mas del Polio, 46469 Beniparrell (Valencia), España. +34 961 211 778. www.incop

INCO 70.4 Curved ® CURVED ROOFING Material: Steel Yield strength (N/mm2): 280 Deflection (mm): L/200 Profile features Thickness (mm) Maximum load (daN/m2) Uniformly distributed load Load type Uniformly 0,60 Non-uniformly Uniformly 0,70 Non-uniformly Uniformly 0,75 Non-uniformly Uniformly 1,00 Non-uniformly Uniformly 1,20 Non-uniformly Radius, R (mm) 7.690 Height, F (mm) 721 Angle, α (º) 25,0 Non-uniformly distributed load Note: On our website, you can find the most recent updated version of these tables. www.incoperfil.com/fichas_tecnicas Powered by TCPDF (www.tcpdf.org)