LC1x30-E-AN
1 / 2Páginas

{{requestButtons}}

Excertos do catálogo

LC1x30-E-AN - 1

Optional version on request (550461: added lacquer coating provides improved robustness in challenging climate conditions (humidity, temperature). • Selectable constant current output: 350 / 500 / 700 mA • Maximum 30 W load • 1-10 V control input, 1 %-100 % dimming range • Protected up to 4 kV power network fast transients • High efficiency, 0.87 • Optional click-on strain relief for independent use • External NTC thermal input • MIMO3 and pDim sensor compatible Connections KeiLaranta 5 FI-02150 Espoo Finland helvar.com Operating Conditions and Characteristics Max temperature at Tc point 75 °C Ambient temperature range -20...+50 °C (Independent use Ta_max = +45 °C) Storage temperature range -40.+80 °C Maximum relative humidity no condensation * Life time 50 000 h, at Tc_max Connections and Mechanical Data Wire size Wire type Maximum driver to LED wire length Weight Thermal sensor input NTC trigger point IP rating Conformity & Standards General and safety requirements EN 61347-1 Particular safety requirements for d.c. or a.c. supplied electronic controlgear for LED modules, acc. to EN 61347-2-13 Thermal protection class EN61347, C5e Mains current harmonics, acc. to EN 61000-3-2 Limits for Voltage Fluctuations and Flicker, acc to EN 61000-3-3 Radio Frequency Interference, acc. to EN 55015 Compliant with relevant EU directives ENEC, CE & SELV marked * Coated version: partially allowed condensation, Ta_Min = -40 °C Note: See page 2 for dimensions Helvar | Data is subject to change without notice. More information at: www.helvar.com

Abrir o catálogo na página 1
LC1x30-E-AN - 2

With strain relief (LC1x30-SR) LC1x30-E-AN LED driver is suited for either in-built and independent luminaire usage. In order to have safe and reliable LED driver operation, the LED luminaires will need to comply with the relevant standards and regulations (e.g. IEC/EN 60598-1). The LED luminaire shall be designed to adequately protect the LED driver from dust, moisture and pollution. The luminaire manufacturer is responsible for the correct choice and installation of the LED drivers according to the application and product datasheets. Specifications of the LED drivers may never exceed the...

Abrir o catálogo na página 2

Todos os catálogos e folhetos técnicos da HELVAR

  1. 320 PIR SENSOR

    2 Páginas

  2. 321 Multisensor

    2 Páginas

  3. 331 Multisensor

    3 Páginas

  4. LL1x30-E-CV24

    3 Páginas

  5. LL1x30-CV12

    2 Páginas

  6. LC1x30-E-DA

    5 Páginas

  7. LC1x30-E-CC

    4 Páginas

  8. LC1x28-AN

    3 Páginas

  9. LL1x26-CC

    2 Páginas

  10. LL25SE-DA-120-500

    6 Páginas

  11. LL25SE-CC-150-500

    5 Páginas

  12. LC1x25-DA

    5 Páginas

  13. LC1x25-CC

    4 Páginas

  14. LC1x25 Active+

    4 Páginas

  15. LL1x21-CC

    4 Páginas

  16. LL1x20-E-CC-500

    2 Páginas

  17. LL1x20-E-CC-350

    2 Páginas

  18. LL1x15-E-CC-500

    2 Páginas

  19. LL1x12-E-CC-350

    2 Páginas

  20. LL6-U-CC

    2 Páginas

  21. 331

    3 Páginas

  22. 12x Digidim

    2 Páginas

  23. LED Solutions

    76 Páginas

  24. Ballasts

    68 Páginas

Catálogos arquivados

  1. Digidim 4

    2 Páginas

  2. Lighting Systems

    12 Páginas