322 HIGH BAY MULTISENSOR
1 / 2Páginas

{{requestButtons}}

Excertos do catálogo

322 HIGH BAY MULTISENSOR - 1

322 HIGH BAY MULTISENSOR Automatically control lighting loads at heights that are too high for general sensors The High Bay Multisensor is a compact unit that provides energy-saving functions in DALI applications where mounting heights are too high for standard sensors, such as warehouses and factories. Sealed with a gasket that protects it from dust and water, this IP65 sensor is designed to be recessed in a ceiling void or in a luminaire construction. Since its detection sensitivity is less dependent on movement direction than that of most PIR sensors, fewer units are required to reliably cover a target area. The unit features: • A passive infrared detector (PIR), which detects movement within its coverage area, allowing load control in response to changes in space occupancy. It switches the lights on when its coverage area is occupied, and off when it is unoccupied • A light sensor, which provides a bright-out function: it can be programmed in Designer to switch off the lights when the natural light rises above a predefined illuminance threshold. Light sensor The High Bay Multisensor is compatible with Helvar’s lighting systems and configuration software, Designer and Toolbox. Key Features • Excellent detection performance through high sensitivity and multidirectional coverage • Suitable for applications with very high ceilings • Protected against dust and water (IP65) • Programmable bright-out control for energy efficiency* Presence Detection Coverage at 15 m Height • Simple connection and integration into a Helvar DALI control network. • Programmable in Designer and Toolbox * Bright-out function is available only on a lighting router system. Presence Detection Coverage at 7.5 m Height Detection pattern at floor level for 7.5 m mounting height Detection pattern at floor level for 15 m mounting height Helvar | Data is subject to change without notice.

Abrir o catálogo na página 1
322 HIGH BAY MULTISENSOR - 2

Technical Data Dimensions (mm) Connections Removable connector block Cable jacket diameter: Wire section: Cable rating: All cables must be mains rated. Power DALI supply input: DALI consumption: Sensors Light sensor: Presence detector: Mechanical data Max. recommended mounting height: Presence detection coverage area: 346 m² @ 15 m mounting height 87 m² @ 7 m mounting height Mounting hole diameter: 52 mm – 55 mm Bezel diameter: Recommended clearance 12 cm (with cable cover, depth: incl. 5 cm for cabling) Material (casing): Finish / Colour: Operating and storage conditions Ambient...

Abrir o catálogo na página 2

Todos os catálogos e folhetos técnicos da HELVAR

  1. 320 PIR SENSOR

    2 Páginas

  2. 321 Multisensor

    2 Páginas

  3. 331 Multisensor

    3 Páginas

  4. LL1x30-E-CV24

    3 Páginas

  5. LL1x30-CV12

    2 Páginas

  6. LC1x30-E-DA

    5 Páginas

  7. LC1x30-E-CC

    4 Páginas

  8. LC1x30-E-AN

    2 Páginas

  9. LC1x28-AN

    3 Páginas

  10. LL1x26-CC

    2 Páginas

  11. LL25SE-DA-120-500

    6 Páginas

  12. LL25SE-CC-150-500

    5 Páginas

  13. LC1x25-DA

    5 Páginas

  14. LC1x25-CC

    4 Páginas

  15. LC1x25 Active+

    4 Páginas

  16. LL1x21-CC

    4 Páginas

  17. LL1x20-E-CC-500

    2 Páginas

  18. LL1x20-E-CC-350

    2 Páginas

  19. LL1x15-E-CC-500

    2 Páginas

  20. LL1x12-E-CC-350

    2 Páginas

  21. LL6-U-CC

    2 Páginas

  22. 331

    3 Páginas

  23. 12x Digidim

    2 Páginas

  24. LED Solutions

    76 Páginas

  25. Ballasts

    68 Páginas

Catálogos arquivados

  1. Digidim 4

    2 Páginas

  2. Lighting Systems

    12 Páginas