321 Multisensor
1 / 2Páginas

Excertos do catálogo

321 Multisensor - 1

The Multisensor is a compact unit that combines a light sensor for constant light control and a passive infrared (PIR) presence detector to provide energy-saving functions in a DALI system. The light sensor measures reflected light from the surface directly beneath it. The unit uses this information to maintain a constant light level by adjusting the lamp outputs. The PIR sensor enables the Multisensor to switch the lights on when its coverage area is occupied, and off when it is unoccupied. The sensor’s settings are adjusted using Helvar’s Designer or Toolbox software. Due to its excellent detection performance, the Multisensor is especially suitable for applications where small or slow movements take place for extended periods of time, such as offices or classrooms. Since its detection sensitivity is less dependent on movement direction than that of most PIR sensors, fewer units are required to reliably cover a target area. The unit can be mounted into a ceiling void or onto a solid surface using Helvar’s SBB-C mounting box (sold separately). Light sensor Constant Light Coverage at 2.5 m Height Key Features • Excellent detection performance through high sensitivity and multidirectional coverage • Programmable constant light control for energy efficiency • 5 mA DALI current consumption • Compact and functional design • Programmable in Designer and Toolbox Presence Detection Coverage at 2.5 m Height Detection pattern at floor level for 2.5 m mounting height Helvar | Data is subject to change without notice

Abrir o catálogo na página 1
321 Multisensor - 2

Technical Data Dimensions (mm) Connections Removable connector block Wire section: Cable rating: All cables must be mains rated. Power DALI supply input: DALI consumption: Sensors Light sensor: Presence detector: Mechanical data Max. recommended mounting height: Presence detection coverage area: Mounting hole diameter: 52 mm – 55 mm Bezel diameter: Recommended clearance 10 cm (with cable cover, depth: incl. 5 cm for cabling) Material (casing): Finish / Colour: Operating and storage conditions Ambient temperature: Relative humidity: Storage temperature: Conformity and standards EMC emission:...

Abrir o catálogo na página 2

Todos os catálogos e folhetos técnicos da HELVAR

  1. 320 PIR SENSOR

    2 Páginas

  2. 331 Multisensor

    3 Páginas

  3. LL1x30-E-CV24

    3 Páginas

  4. LL1x30-CV12

    2 Páginas

  5. LC1x30-E-DA

    5 Páginas

  6. LC1x30-E-CC

    4 Páginas

  7. LC1x30-E-AN

    2 Páginas

  8. LC1x28-AN

    3 Páginas

  9. LL1x26-CC

    2 Páginas

  10. LL25SE-DA-120-500

    6 Páginas

  11. LL25SE-CC-150-500

    5 Páginas

  12. LC1x25-DA

    5 Páginas

  13. LC1x25-CC

    4 Páginas

  14. LC1x25 Active+

    4 Páginas

  15. LL1x21-CC

    4 Páginas

  16. LL1x20-E-CC-500

    2 Páginas

  17. LL1x20-E-CC-350

    2 Páginas

  18. LL1x15-E-CC-500

    2 Páginas

  19. LL1x12-E-CC-350

    2 Páginas

  20. LL6-U-CC

    2 Páginas

  21. 331

    3 Páginas

  22. 12x Digidim

    2 Páginas

  23. LED Solutions

    76 Páginas

  24. Ballasts

    68 Páginas

Catálogos arquivados

  1. Digidim 4

    2 Páginas

  2. Lighting Systems

    12 Páginas