Vanvex 185/S 285/S
1 / 2Páginas

Vanvex 185 - 285 Description Vanvex domestic water heat pump is a complete unit consisting of a 185/285-litre hot-water cylinder, extract fan, heat pump and Optima 180 control.The S-models are with an intential heating element ready for connection to solar panels. Suitability Vanvex domestic water heat pump can utilise the energy of both indoor and outdoor air for heating domestic water and is capable of covering a family’s hot water requirements all year round. The heat pump can produce approx. 380 l of hot water a day at a temperature of 55˚C. Capacity is dependent on the outside temperature, the supply temperature of the cold water and the draning off pattern. If the cylinder is emptied of hot water, it is possible to connect a 1 kW electric heating element, which will help quickly heating up the water. When the desired temperature has been reached, the electric heating element will switch off. Energy consumption is normally 30% of consumption using an electric water heater. 600 116,7 Main dimensions: (h x l x d) ex. connecting pieces Vanvex 185 /S: 1415 x 600 x 664 mm Vanvex 285 /S: 1865 x 600 x 664 mm Cabinet: Fully closed hot galvanised plate with 30 mm Isolation. The cylinder is fully insulated with polyurethane foam. Plastic-coated white RAL 9010. Duct connection: Ø160 mm with rubber ring seal Protection of the cylinder: Enamel and magnesium anode inside Protection of the internal heating coil (only the S-type): Enamel outside 1: Fresh air 2: Exhaust 3: Electrical connection/ automatics fuse 4: Condensation drain 5: Compressor 6: 185/285-litre cylinder 7: 3/4˝ anode 8: 1 kW electrical heating element Condenser: D-pipe condenser wrapped around the outside of the cylinder. Front: Front with bolts in the top 9: Condensing coil 10: High-pressure gov. with manuel reset 11: Cold-water inlet 3/4˝ RG pipe thread 12: Hot-water outlet 3/4˝ RG pipe thread 13: Connection for the internal heating coil. 3/4˝. RG pipe thread (only the S-type) 14: Connection for the internal heating coil. 3/4˝. RG pipe thread (only the S-type) 15: Hot-water circulation 3/4˝ RG pipe thread Condensation tub: Stainless steel Condensation drain: Synthetic tube Ø15 mm (inside) Weight without /with water: Vanvex 185S: 195/380 kg Vanvex 285S: 210/500 kg 1 Construction changes reserved (P V5.0 - 0110)

Vanvex 185 - 285 Technical data Sound data Measuring point Fan with directly connected motor R2E 190 The air volume 50 % of max. speed at 25 Pa extern of presure loss - 135m³/h 100 % of max. speed at 100 Pa extern of presure loss 280m³/h The equipment is delivered with Optima 180 control panel. The control panel is on the front cover. Compressor NE 6210 Z Effect collection (max) 585 W Power consumption (max) 3.14 A Average performance 1365 W Average effect consumption 425 W Operating menu The value of each menu point can be changed by pressing on the bottum below. P1: Step Here is it...