Torrium2
1 / 4Páginas

Pressure System Controls APPLICATIONS Ideal for pumps supplying clean, non-volatile liquids without fibres or solids in such applications as:• Household water supply • Irrigation • Water transfer • Washing systems • Pressure boosting Why choose thE Davey Torrium®2 controller? Constant Flow and Even Water Pressure To prevent annoying fluctuations in water temperature during showers, Torrium®2 uses its intelligence to provide households with constant flow to give even water pressure. It does this with its innovative pressure and flow sensors to start the pump on a pressure drop and to stop it on low flow (~1 lpm). This avoids pump cycling when there is continuing household demand for water. Quick Cut-in for Even Pressure To give you strong pressure right from the start, Torrium®2 is designed to cut in quickly when it senses demand for water. It cuts in when the pressure has dropped to 80% of the previous top (shut-off) pressure. It uses its intelligence to automatically set this cut-in pressure each time the pump stops. In doing so, it allows the system to automatically accommodate for variations in pump performance or site conditions. Torrium®2 Controller Model Numbers: TT45 & TT70 Torrium®2 is an intelligent controller designed to supply pressure boosted water with constant flow and even water pressure to domestic households. It incorporates several levels of pump protection. Adaptive Starting Torrium®2 is clever enough to detect the difference between normal water demand and a small leak in the system, such as a dripping faucet or a leaking cistern. For very low flows, Torrium®2 automatically adapts to reduce the cut-in pressure, which can be as low as 50% of its last shut-off pressure. This significantly reduces pump cycling to improve consumer satisfaction with the system. If normal flow is required in the house (>0.5 lpm), Torrium®2 will sense this and revert to normal mode and initiate an immediate pump start. Easy Status Check To easily check the system status, Torrium®2 has three simple LED indicators. • Red LED - the system is in standby mode • Green LED - the pump is running • Yellow

Torrium®2 Pressure Controller Pressure Indicator Window To give a quick guide to the system pressure, Torrium®2 has a pressure indicator window on the side of the inbuilt pressure vessel. If the colour band (green-yellow-red) is mainly green it indicates maximum pressure, whereas mainly red indicates low pressure. This indicator can help to analyse the occurrence of unwanted system leaks. If the colour band indicator is moving slowly towards red this signifies a slow drop in pressure and may indicate a small leak. Greater Hydraulic Performance For better hydraulic performance to supply more...

Torrium®2 Pressure Controller OPERATING LIMITS ELECTRICAL DATA HYDRAULIC PERFORMANCE

Torrium®2 Presure Controller DIMENSIONS (mm) , °2 ■Dt Priming Port/Outlet * Suction & delivery accept 1V2” PVC pipe on the I.D. and 2” fitting on the O.D. PUMP With Torrium®2 MODELS davey.com.au | daveynz.co.nz This literature is not a complete guide to product usage. Further information is available from your Davey Dealer, Davey Support Centre and from the relevant product Installation and Operating Instructions. Must be read in conjunction with the relevant product Installation and Operating Instructions and all applicable statutory requirements. Product specifications may change without...