XCP
1 / 108Páginas

XCP ZUCCHINI BUSBAR FOR POWER APPLICATIONS GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURE

Contents 4-14 General features XCP. Safety, flexibility and simplicity . . . . . . . 4 Range features . . . . . . . . . . . . . . . . . . . 8 XCP-S and XCP-HP: 2 product lines . . . . . . . 9 Range composition . . . . . . . . . . . . . . . . 11 Product news . . . . . . . . . . . . . . . . . . . 12 NEW fiberglass and metal tap-off box . . . . . . 13 Busbar selection guide . . . . . . . . . . . . . . 15 XCP-S. . . . . . . . . . . . . . . . . . . . . . . . 23 XCP-HP . . . . . . . . . . . . . . . . . . . . . . . 51 Accessories . . . . . . . . . . . . . . . . . . . . 79 Tap-off boxes . . . . . ....

busbar trunking XCP is the new Zucchini busbar trunking system ranging from 630 A to 6300 A with an IP55* degree of protection. It is the most suitable solution for the transport and distribution of energy in industrial, commercial and service sector installations. The main features of the range are SAFETY, FLEXIBILITY and SIMPLICITY CERTIFICATION AND TESTS The busbar trunking has been tested and approved according to IEC 61439-6 Low voltage switchgear and controlgear assemblies. Part 6 refers to busbar trunking systems (busways) Riser end feed units. Commercial and service sector buildings...

Safety Fire resistance In installations where there is a high risk of fire, the XCP busbar trunking system solution can provide technical advantages. Thanks to the low fire load of the busbar, the safety of the building is much improved. XCP has been fire resistance tested in accordance with IEC 60331-1. Maximum strength The XCP range has been designed and manufactured for heavy industrial environments. The busbar is self-supporting and the degree of impact resistance of the casing which houses this line, is the maximum stated in IEC EN 60068-2-62: IK10. Insulation technology In order to...

PRE-INSTALLED MONOBLOC With XCP, the design and installation of the power distribution line become quick and simple. In order to facilitate and reduce the installation time, the elements are supplied with a monobloc which is pre-installed at the factory and the connections between them are keyed, which ensures that the installation of the components is in the correct position. PSZ software To guarantee a fast and accurate service to its customers, Legrand has developed PSZ, a proprietary software for the processing and realization of projects with busbar trunking. This service supports the...

With PSZ* you can have a detailed list of the item codes that you find in this catalogue. Furthermore, the possibility to export the drawing to Autocad or Revit**, allows you to enter the paths of the busbar directly into the design of the building and to follow any design changes quickly and professionally. EXAMPLE OF A DRAWING EXPORT IN AUTOCAD EXAMPLE OF THE DRAWING EXPORT IN REVIT The new release of the program has been implemented with new features that make PSZ even more complete and high performing. THE POSSIBILITY TO MANAGE SINGLE PIECES THROUGH A NEW ALGORITHM WHICH IS ABLE TO...

RANGE features Xtra-compact design XCP is available with aluminium or copper conductors and is characterised by a smart and extra-compact design. The external dimensions do not change based on the number of conductors. The length and height change with the rating, but are the same for all three combinations of conductors (3 - 4 - 5 conductors) available. Often, for the transport and the distribution of high power (5000A Al /6300A Cu rated current), the energy distribution consists of a parallel of two independant busbars. With XCP multi-bar design is always supplied in a single structure so...

XCP-S and XCP-HP 2 product lines The range of XCP busbars consists of two different product fines: • XCP-S • XCP-HP While maintaining the same basic characteristics, such as the range of rated current, the construction materials and the same amount of accessories available, XCP-S and XCP-HP have different properties that make them able to satisfy aff the demands of the world market. XCP-S is the optimised solution for the most common performance requirements. The optimised sections of internal conductors allow this busbar to be fighter and more compact than XCP-HP, making it the right...

2 product lines Energy Saving The two busbar ranges, XCP-S and XCP-HP, also differ in the loss values due to the Joule effect. XCP-HP has lower Joule losses compared to XCP-S and this feature means that in a relatively short time it will be possible to recover the additional cost invested in the purchase of a low loss busbar duct, compared to the cost of a standard loss busbar duct. Difference in initial investment In the graph below you can see an indicative example of the possible economic savings in relation to the loss values of the busbar duct. BEP (break even point) Difference in...

composition XCP includes all the necessary components to enable any path for the busbar run that the project requires. The busbar system is composed of: STRAIGHT ELEMENTS: for transport and distribution (with tap-off outlets) of high-power energy. ADDITIONAL ELEMENTS: able to meet any installation requirement (fire barrier, phase inversion...) HORIZONTAL ELBOW WITH DOUBLE BAR VERTICAL ELBOW WITH DOUBLE BAR CONNECTION INTERFACES PLASTIC TAP-OFF BOXES PLUG-IN TYPE ELBOWS: able to meet any change of direction and plan with standard or special solutions. TAP-OFF BOXES: for connecting and...

PRODUCT news End feed unit for rising mains New feed units are used at the start of the riser mains lines, when the busbar must be placed against the wall and powered using cables. These new feed units allow you to install the product at a minimum distance of 40 mm from the wall. New monobloc XCP is equipped with a new monobloc covered by a Legrand patent. This new monobloc ensures a better connection of the junction with less contact resistance. The insulation part of the monobloc is made by termoset insulation material Class F (155°C) and for each conductor there are two plates that...