Catálogos >
ASTEL LIGHTING >
Meteor XP

Meteor XP
1 / 12Páginas

Excertos do catálogo

UNDERWATER POOL LIGHT Operating Instructions

PRECAUTIONS The METEOR XP series of modern compact flush-mount designed underwater pool light with built-in driver is designed to use the latest LED lighting technology. The compact flush-mount designed casing enables very simple installation to the stainless-steel, concrete or liner/concrete pools with suitable niches. The special connector assembly enables very simple maintenance or replacement during servicing period. The METEOR XP series is available in stainless steel casings. The lighting is available in cool white, warm white, blue, green, red and multi-color RGB or RGBW colors with...

Abrir o catálogo na página 3

(1) Optical window Tempered glass optical window. (2) Underwater pool light casing Stainless steel casing incl. fixing plate with mounting holes and water cooling slots. (3) Connector assembly The multi-core cable to connect the DC power supply and optional remote control or switch. (4) Fixing screw 2 fixing screws to fix the underwater pool light into the suitable niche.

Abrir o catálogo na página 4

INSTALLATION The underwater light kit consists of the following components: • Underwater Light METEOR XP with connector assembly and connection cable • 2 x fixing screws M6x40 • Operating Instructions with Declaration of Conformity and Warranty conditions The METEOR XP has to be fixed into the suitable niche on the pool wall under waterline. Leave at least 2m of connection cable wrapped inside the niche for future maintenance and service. When the installation is finished briefly test the underwater light prior to fill the pool with water. The installation have to be realized by a qualified...

Abrir o catálogo na página 5

For basic control of the light the CONTROL wire has to be connected through the momentary switch (not included) to the GND by using a 2-pole signal cable extension. (not included) For DMX512 control optional LXU01 interface can be connected to the CONTROL and GND wires by using a 2-pole signal cable (not included). Note: • When two or more lights are connected in the lighting system all the control wires can be connected in parallel and all the lights then can be controlled by using only one momentary switch or LXU01 interface.

Abrir o catálogo na página 6

Single-color cool white (W), warm white (WW), blue (B), green (G) or red (R) models Control by momentary switch Remote control by momentary switch can be used to turn-on and turn-off the light and to control the luminosity. Turning on / off Press the momentary switch momentary. Dimming When the light is on, press the momentary switch longer until the desired power is achieved. Turning on minimum When the light is off, press the momentary switch longer (e.g. one second or more) until the light is turned on at minimum power. Set default Press the momentary switch for min. 40 seconds or until...

Abrir o catálogo na página 7

Setting the Custom Color At the selected (Rainbow) Color Spectrum mode press the momentary switch shortly to turn the light off. After that press the momentary switch for 5 seconds or until the light is switched to the selected color and then the Custom Color is set and selected. Setting the Custom White Color At the selected White Color Spectrum mode press the momentary switch shortly to turn the light off. After that press the momentary switch for 5 seconds or until the light is switched to the selected white color and then the White Color is set and selected. Dimming When the light is...

Abrir o catálogo na página 8

TECHNICAL SPECIFICATIONS Power supply Beam angle Optical window Luminous flux White color temperature Operating temperature Casing Protection Dimensions Weight 12-24 Vdc, max. 9.7 A/12 Vdc or 4.6 A/24 Vdc 35° (standard) Tempered glass 8 mm max. 10.000 lm (cool white) (LFR3210) max. 15.000 lm (cool white) (LFR3215) 6.000 K -10°C - +50°C Stainless steel (316L) IP 68 0240 x 220 X 64 mm 4.3 kg Design and specifications subject to change without notice.

Abrir o catálogo na página 9

WARRANTY 1. The equipment manufactured by ASTEL d.o.o. is warranted to be free from defects in workmanship and materials under normal use and service. 2. This Warranty is in effect for of two years from the date of purchase by the user. Proof of purchase must be included, to establish that it is inside the warranty period. 3. This Warranty is transferrable and covers the product for the specified time period. 4. In case any part od the equipment proves to be defective, other than those parts excluded in paragraph 5 below, the owner should do the following: (a) prepare a detailed written...

Abrir o catálogo na página 10

Manufacturer's Name: ASTEL, Podjetje za projektiranje, proizvodnjo in trgovino, d.o.o. Manufacturer's Address: Dutovlje 138 6221 Dutovlje Slovenija declares that the products Item, Product Name and Model Number: 1. Underwater Pool Light METEOR XP conform to the following Product Specifications: EMC: EN 55015:2006 + A1:2007 Supplementary Information: The products herewith comply with the requirements of the following Directives and carry the CE-marking accordingly: -the Low Voltage Directive 2014/35/EU -the EMC Directive 2014/30/EU -the RoHS Directive (EU) 2015/863 ASTEL d.o.o. Dutovlje 138...

Abrir o catálogo na página 11