Catálogos >
Ancon Building Products >
Restraint System

Restraint System
1 / 4Páginas

Excertos do catálogo

Ancon 25/14 Restraint System The Ancon 25/14 Restraint System fixes an outer leaf of brickwork to a light steel frame, through any type of insulation. Self-drilling high-thread screws fix through the channel and the insulation, into the steel. Once the channel is installed, Ancon SD25 wall ties can be positioned at any point along its length and are built into the bed joints of the outer leaf of brickwork. Self-drilling high-thread screws are available for use with a maximum combined insulation and backing board thickness of 220mm. When using rigid insulation board up to a depth of 220mm or Isover Polterm Max Plus, Knauf Insulation Earthwool RainScreen Slab and ROCKWOOL Rainscreen Duo Slab up to 180mm, the screws can be installed directly through the insulation. When using other thicknesses of these insulations or other semi-rigid/flexible insulations, an Ancon Compression Sleeve (the same depth as the insulation) should be used around the fixing screws to provide the necessary support. System Components 25/14 Channel Lengths: 2700, 3000mm High-thread Fixing Screws Lengths: For an insulation depth up to 220mm SD25 Wall Ties Lengths: For open cavities up to 259mm Screw Length Open Cavity Insulation/ Backing Material Depth Warranty Ancon provides a warranty on its stainless steel 25/14 system, guaranteeing the design performance for 60 years. When using our zinc plated fixing screws, a 25 year warranty is offered. Contact Ancon for full details and conditions. This system has been independently tested by Lucideon and a CE Declaration of Performance is available to download from www.ancon.co.uk/CE. Ancon Compression Sleeves may be required around the fixing screws with some insulations

Abrir o catálogo na página 1

Ancon 25/14 Channel 25/14 channel is available in lengths of 2700mm and 3000mm. It features prepunched holes at close centres to ensure a fixing position is always located near the end, even when it is cut on site. The channel has a 16mm opening to easily accommodate a drive socket and washer for the fixing screws. Ancon High-Thread Fixing Screws Screws are available to accommodate a combined backing board and insulation thickness of up to 220mm and a steel thickness from 1.2mm to 3mm. Ancon Fixing Screws feature a shaped drill tip of hardened steel that allows installation without...

Abrir o catálogo na página 2

Ancon 25/14 Restraint System The Ancon 25/14 Restraint System ties an outer leaf of brickwork to a concrete frame. Screws fix through the channel and a stainless steel compression sleeve, located in the insulation, and into a pilot hole in the concrete. Ancon SD25 wall ties are located in the channel and built into the bed joints of the outer leaf of brickwork. This system has been independently tested by Lucideon and a CE Declaration of Performance is available to download from www.ancon.co.uk/CE. It is suitable for use with all insulation types. System Components 25/14 Channel Lengths:...

Abrir o catálogo na página 3

Ancon 25/14 Channel 25/14 channel is available in lengths of 2700mm and 3000mm. It features prepunched holes at close centres to ensure a fixing position is always located near the end, even when it is cut on site. The channel has a 16mm opening to easily accommodate a drive socket and washer for the fixing screws. Ancon 25/14 Channel Profile Ancon 25/14 channel features alternate 5.3mm and 9.5mm diameter holes to accept different fixings. The smaller diameter holes a should be used when fixing to steel/timber. 3 The larger diameter holes are tox accommodate fixings for concrete. 3...

Abrir o catálogo na página 4