Excertos do catálogo

UI/D Xt6 n May 2010 IL" sonry Support Systems & Lintels r the Construction Industry
Abrir o catálogo na página 1
Ancon designs and manufactures high integrity steel products for the construction industry. Through continuous programmes of new product development, inward investment and employee advancement, the company is committed to maintaining the highest level of customer service within a dynamic and challenging industry. Masonry Support Systems Lintels Masonry Reinforcement Windposts and Parapet Posts Wall Ties and Restraint Fixings Channel and Bolt Fixings Tension and Compression Systems Insulated Balcony Connectors Shear Load Connectors Punching Shear Reinforcement Reinforcing Bar Couplers...
Abrir o catálogo na página 3
Ancon Thermal Breaks Masonry support Systems from Ancon can now be supplied with Thermal Breaks to minimise heat loss through cold bridging, and improve the energy efficiency of your building project. Shaped like a standard Ancon key-hole shim, these Thermal Breaks are designed to locate quickly and easily between the support bracket and the structural frame. They are manufactured from a durable fibre-reinforced thermoset plastic, which has a thermal conductivity of just 0.3W/mK*. icon Thermal Breaks Low thermal conductivity High compressive strength Water- and flame-resistant Easy to...
Abrir o catálogo na página 4
Ancon Thermal Breaks can be used singularly or as part of a shim pack. When used in conjunction with stainless steel shims, the Thermal Break should be located against the structure. Care should be taken not to exceed the maximum shimming allowance. Specifying and Ordering The standard Ancon Thermal Break, as illustrated overleaf, can be ordered using the product code 'BK03-135'. This product is suitable for standard AnconOptima support brackets and most Ancon MDC-type brackets. Thermal Breaks can be specified with a support system using the suffix 'BK03': MDC / Cavity / Masonry Load /...
Abrir o catálogo na página 5
Standard AnconOptima System Fixed to CombiDeck Edge Trim MASONRY SUPPORT SYSTEMS Structures with brick or stone cladding will usually necessitate the use of a stainless steel support system for the masonry. Bracket Angle Support System AnconOptima is unlike welded systems, the brackets and angles are supplied as separate components. This provides greater flexibility in the final fixing position of the brackets and makes the system easier to handle on site. Standard systems are available to support a masonry load of up to 14kN/m. Brackets for these systems are stocked to suit cavities from...
Abrir o catálogo na página 6
Tel: +44 (0) 114 275 5224 Web: www.ancon.co.uk Individual Bracket Support System Ancon Individual Brackets provide great flexibility in design. They are ideal for the support of brickwork curved on plan (pages 22-23). Stonework Support Natural stone cladding is often a combination of large individually-sized stones and requires particular attention. Ancon MDC/S Stonework Supports can be designed in a variety of configurations to suit the particular application (pages 24-27). Spcial MDA Brackets Supporting Brickwork Curved on Plan MDC/SC Stonework Support System LINTELS Ancon Lintels are...
Abrir o catálogo na página 7
Masonry Support Systems & LinteLs Prvention of Bi-metailic Corrosion *OVQSU陇)f&t a^r«s. $ro*n us SOS - Oamp/mt rtaadfltBratfaf Typical Support Dtail DESIGN CONSIDERATIONS Structura with bnck cr fit one daddng wil usuriy n響cessitt e the use of startess sted euport fer the masonry over honrcrttal movement jorts. Dflcrorrti⧩ rrrwcmont. corrosion rsistance, type of cbdrJng and trame type, ail need to be censidered. Diffcrcnbaf Movement The maximum are of a masry pand arotid be restricted to imJt the eflects of dfferential movOTent The is partiatoty rr霧ortnt ʩ day fcridcwork e uaed with cencrete...
Abrir o catálogo na página 8
Tolrances It ts mpertant to select the correct support System to «neure Itiat building toler ancee can be accommodated, Adjustment wi be roqurod in al three planes. Ancon brackflts have a sfc* al the back to provide vertcal acfcustment, A serrted surface Fxeverts ary slp. Long颉udraf adfjstment ft FTOwddd by an Ancon cast-h charnel in cercrat structures, a horiontaly slotted h䮴tes m sted framed structures. The AnconOptirre System faatuBB a ftxmg zone provking a trta! c* 5Crrm hOTontal adjjstment dkwng the s^tem to be fixod to prinMod hetee rather than stets in steetacrk and eimnates daahee...
Abrir o catálogo na página 9
Masonry Support Systems & LinteLs Ancon Optima Standard AnconOptima 14 System. Standard Brackets, Locking Wedges and a 790mm Angle with Blue Fixing Zones ANCONOPTIMA The Industry's growing emphasis on speed of construction, and the inability of welded bracket support systems to provide sufficient adjustment on site, led Ancon to develop AnconOptima. AnconOptima is a bracket angle masonry support system. Unlike welded systems, the brackets and angles are supplied as separate components. This provides greater flexibility in the final fixing position of the brackets and makes the system easier...
Abrir o catálogo na página 10
tet +44 (0) 114 275 5224 WetKWWWJftCoruco.uk Vertical Adjustment Vertical actustment « achieved by the d«*p slot in the beck of the bracket. Horizontal Adjustment AnccnOptma anglce have a 100mm pre-marked fxrg zone v*hidi roudea 50mm horcntal aefustment. If fiw>g rto concr穨te wth eqwneicn bote, the brackot can be moved to oimnato ctashes between the berts and reinfordng bars. Horizontal acKjetment can be ncreased by fixng the System to an Ancon charnel cast nto the face of the cencrete. K fixng to stettocrk, the txackets can be moved to afcgn wth the location ot a hde, negathg the need for...
Abrir o catálogo na página 11
Installation Installation of AnconOptima provides significant time savings over welded support systems. The individual components are easier to move around site, often without hiring crane time. The preferred technique of installers is to level and fix two brackets and simply slide the angle into position. This reduces the time spent tightening and loosening the fixing bolts of a welded bracket system, in order to achieve a level horizontal shelf. Where space limitations prevent the angle from sliding, the brackets can be positioned on the angle and conventionally fixed; the smaller lengths...
Abrir o catálogo na página 12Todos os catálogos e folhetos técnicos da Ancon Building Products
-
Eazistrip
16 Páginas
-
04a_-_Ancon_Thermal_Windpost_TWP2
2 Páginas
-
Tapered Thread Couplers
12 Páginas
-
MBT MechanicallyBolted Couplers
10 Páginas
-
Staifix HRT4 Wall Tie
1 Páginas
-
2019 Staifix Wire Balloons
1 Páginas
-
Stainless steel wall ties
1 Páginas
-
CB Coupler Box and CS Coupler Strip
8 Páginas
-
EC2-Compliant Design Method
12 Páginas
-
Reinforcing Bar Couplers
28 Páginas
-
Tension and Compression Systems
16 Páginas
-
Restraint System
4 Páginas
-
Ancon Thermal Breaks
2 Páginas
-
Ancon 500 Tension Systems - ETA-060146
19 Páginas
-
Staisil HLD Acoustic Shear dowels
4 Páginas
-
Gauge Tape
2 Páginas
-
Non-Drill Wall Ties
6 Páginas
-
CCB Cellular Clay Block Wall Ties
4 Páginas
-
Low Thermal Conductivity Wall Ties
4 Páginas
-
Refractory Fixings
8 Páginas
-
Staifix Wall Ties
2 Páginas
-
Thermally Insulated Balcony Connectors
32 Páginas
-
Special Fabrications
12 Páginas
-
Punching Shear Reinforcement
12 Páginas
-
Starter Bar Systems
8 Páginas
-
KSN Anchors
24 Páginas
-
MultiJoint & Individual Plate Dowels
12 Páginas
-
Lockable Dowels
12 Páginas
-
DSD/ESD Shear Load Connectors
20 Páginas
-
Masonry Reinforcement
16 Páginas
-
Tension and Compression Systems
16 Páginas
-
Corner Guards
2 Páginas
-
Hidden Strength
7 Páginas
-
Isolan Insulated Balcony Connectors
20 Páginas
-
Stainless Steel in Construction
12 Páginas
-
12 Page Product Guide
12 Páginas
-
Ancon Guide: CE Marking to the CPR
12 Páginas
-
Wall Ties and Restraint Fixings
32 Páginas
Catálogos arquivados
-
2016 Staifix Wire Balloons
1 Páginas
-
Channel and Bolt Fixings
20 Páginas
-
Windposts and Parapet Posts
8 Páginas