All product
1 / 404Páginas

The company Giordano Riello, founder and chairman of Aermec, assisted by his son Alessandro and daughter Raffaella, has solidly associated the Company name with precise values: Respect for the environment by using new eco-friendly refrigerants as well as innovative installations using water as the carrier fluid. Noise pollution control with low-noise emission products, which undergo scrupulous testing before being put on the market. Energy saving, the great challenge of the Third Millennium, with the development of combined heating and air conditioning systems where appliances are used only...

Hystory 1961 Giordano Riello sets up Riello Condizionatori, initially producing for contractors only. The story begins. 1963 The Aermec brand is born and marks all future company products designed and manufactured on site. The brand name gains a stronghold as a major product name in Italy and throughout Europe. 1970 Aermec can already supply fresh and warm air. Aermec presents the first dual section conditioner: the first “split-system”. Fancoil production starts. 1980 The Eighties sees the development of water chillers and air handling units. 1990 The Nineties mark the definitive...

2 HEAT RECOVERY UNIT

WATER-COOLED CHILLERS, HEAT PUMPS AND MOTOEVAPORATING UNITS WATER-COOLED PACKAGED AIR CONDITIONERS COMPONENTS FOR AIR CONDITIONING SYSTEMS

4 ROOM AIR CONDITIONERS GREEN LINE BLUE LINE WATER COOLED CONDENSING UNIT

Aermec and fancoils: complementary names where the company identifies and product and vice versa. In this area of climate control, Aermec is a real leader: a major company in Italy and one of the top in Europe. A leading position gained through long-standing experience that has gained ground year after year. Special attention to detail, quality materials and state-of-the-art technology ensure optimal performance with virtually imperceptible noise levels, especially at low speed; attention paid to dimensions and overall size, comparable to those of standard radiators, to enable installation...

Fan coils Universal and floor installation White: housing: RAL 9002 head and feet: RAL 7044 FCX APC ZX Aermec participate in the EUROVENT program: FC / 2 / H, FC / 4 / H the products are present on the site www.eurovent-certification.com Plasmacluster FCX-U PLASMACLUSTER ioniser filter Plasmacluster reduces pollutants by decomposing their molecules. ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ neutralise the molecules of the gas pollutants, thereby creating products that are normally found in the air anyway. The result is in the air: at last you'll be able to breathe clean, ionised air free of any bad...

SIT5: commands the 3 fan speeds and up to 2 ฀ VCFD: Kit consisting of powered 2-way valve, copper couplings and pipes. For 3/4-row and valves (four pipes systems); sends the comman฀ ฀ ฀ ฀ ฀ ฀ ฀ ds of the thermostat to the fan coils network. with FCX ACT, too. Versions with 230V and ฀ SW3: water temperature probe that gives the 24V~50Hz power supply. automatic season change feature to electronic thermostats supplied with water-side change VCF_X4: The valve kits are designed for fan over. coil units with single coil, installed in a 4 ฀ SWA: SWA external probe accessory (length L ฀ ฀ ฀ ฀ ฀ ฀ ฀...

Technical data Heating capacity Heating capacity (water Heating capacity (electric resistor) Water flow rate Water pressure drops Total cooling capacity W (med.) Sensible cooling Water flow rate Water pressure drops kRa (E) J>Sound pressure Sound power Water content electric heater nput current with electric heater Coil connections (E) = EUROVENT certificate performances Performance values refer to the following conditions: J> Level of sound pressure (A-weighted) measured in the room with volume V= 85m3; reverberation time t=0.5s; direction factor Q=2; • maximum speed: - water inlet...

Mod FCX (A - AS - ACT - APC) Height with feet Width Feet height Rear height with feet Weight (without feet) Mod FCX (U - UE) Height Width Weight Mod FCX (UA) Height Width Weight Mod FCX (B) Height Width Weight Aermec reserves the right to make all modification deemed necessary for improving the product at any time with any modification of technical data. Aermec S.p.A. Via Roma, 996 - 37040 Bevilacqua (VR) - Italy Telephone 0442633111 - Telefax 044293730 www.aermec.com

Fan coils with Inverter brushless motor Continuous 0-100% air flow rate regulation Universal, floor and ducted installation FCXI P Aermec participate in the EUROVENT program: FC / 2 / H the products are present on the site www.eurovent-certification.com housing: RAL 9002 head and feet: RAL 7044 The future is Inverter FCXI is the Aermec range of fan coils with continuous 0-100% air flow rate variation and therefore continuous heating/ cooling capacity variation. Thanks to the Inverter technology, the FCXI continuously modifies the air flow rate, adapting it - moment by moment to the real...

Brushless electric motor ฀ ฀ ฀ ฀is the result of combining the most sophisticated technologies from the fields of mechanics and electronics. ฀ ฀ ฀ ฀ The brushless electric motor has no sliding contacts between the rotor and the stator. In brushless motors, the rotor consists of permanent magnets whose magnetic field interacts - without any mechanical contact - with the stator windings. With the special inverter device, it is possible to control the speed and torque of the rotor continuously, just by means of the stator currents. Compared with the traditional alternate current motors, the...

FCXI fancoil Size 40 U-P U-P AS - (P+MA) U - (P+MU) U - (P+MU) P P AS - U - P AS - U - P AS - U - P AS - U - P P P P P AS - U - P P P P P P P P P P P P P P P P P P P P P P P P P P P P P AS U AS U AS U AS - U P P P P P P P P P P P P P P P P P P P P P P AS - P AS - P AS - P AS - P AS - U - P AS - U - P AS - U - P AS - U - P AS - U - P AS - U - P AS - U - P AS - U - P AS - U - P AS - U - P AS - U - P AS - U - P AS - U - P AS AS P P * = The DSC4 accessory is not compatible with AMP and BC4_5_6_8_9 accessories. The DSC4 accessory is compatible with AMP20 accessory. ** = 24 Volt. *** = Only for...