technical specification zineare | system seating PRODUCT DESCRIPTION Zineare is a seating system designed to sustain long-term use without sacrificing comfort. It is exceptionally robust and requires minimal maintenance. Zineare’s flexible modular nature offers a multitude of elements in many finishes. The design includes seat and backrest plus beam, arm, leg, table and bench units. There are three leg options including a bolt down version and the system is also available in two sizes. Zineare enables many options to be achieved, i.e. back to back seating, modules of seat and table spaces from 2 – 6 units that can be arranged in continuous rows. Tables can be added at any point in the row to respond to planning layout requirements. The seats, backrests and benches can be upholstered in PVC, fabric or hide in a wide choice of colours or finished in veneered or laminated plywood. SUPPORTING BEAM 60mm x 60mm x 3mm Square Steel Tube EN43A P+O. 1km semi – bright electric resistant welded steel tubes to B.S6323 part 5. LEGS AND FEET Manufactured from triangular section cold drawn welded steel tube with a 3mm wall thickness, welded to 50x50x2mm demountable tubular supports, covered by a shroud of 70x70x2mm square section tube. Feet are fitted with nylon glides if freestanding. Tubes to B.S6323 Part 5. SEAT AND BACK From 2.5mm CR4 Mild Steel perforated sheet formed to shape. Riveted to 6mm thick laser profiled ribs. Alternatively, plywood finished in polished show wood veneer or decorative laminate can be specified. SEAT AND BACK CUSHIONS Removable upholstery pads finished in PVC, Hide or Fabric. Upholstery material is fitted over fire retardant foam secured to preformed plywood inner support shapes, which are mechanically fixed to the steel body shapes. ARMS From 40x5mm bright drawn steel strip with rounded edges to B.S6323 part 5, formed to shape and finished in nickel chrome or paint (to customer specification). TABLES Fabricated from perforated mild steel with rolled edges. Alternatively table tops can be constructed from a range of standard board materials faced and balanced using decorative laminates in a choice of colours, with integrally moulded polyurethane bullnose edges. SPACER BARS Available for maintaining the correct distance between seat rows when placed back to back. ASSEMBLY Seating is shipped as semi-constructed elements to facilitate fast on-site assembly. Alternatively the seating can be shipped fully assembled depending on client/project requirements. A full explanation of assembly is available on request. FINISH Beam and body shapes: Pre treated and epoxy polyester powder coated. Alternatively a superior quality can be specified by using a metallic powder base coat, then top coated with polyester clear lacquer to give a durable finish, resistant to finger marks. www.zoeftig.com Zoeftig Ltd Kings Hill Industrial Estate, Bude | North Cornwall, EX23 8QN, United Kingdom ph: +44 (0)1288 35 45 12 f: +44 (0)1288 35 59 54 e: [email protected] Zoeftig Inc 8770 West Bryn Mawr Ave, Suite 1300, Chicago, Illinois, 60631-3515 USA ph: +1 773 867 8560 f: +1 773 867 2910 e: [email protected]

zineare | technical specification PAGE 2 OF 2 Powder Coating Thickness – 50-70 microns Lacquer Thickness – 50-70 microns Overall Thickness – 100-140 microns Gloss % (after powder coating & lacquer) = 105-120% TECHNICAL DATA TYPICAL DIMENSIONS Standard seat size Width – 510mm Depth – 584mm Height – 740mm Larger seat size Width – 588mm centres Depth – 584mm Height – 776mm WEIGHT per seat place (based on a 4 seat beam) = approx. 17 kgs STRENGTH RATING FIRA special test specification for stadium, auditorium units based on B.S4875 (1985): Parts 1 and 3 to test level 5 and is structurally suitable...