*myarchiexpo

RE/I

RE/I

Product catalog summary

Technical Specifications
The document outlines the specifications for industrial electric heaters, categorized into medium and high power models. The models range from RE/I 30 to RE/I 120, with corresponding 3-phased models from W40TIT30 to W40TIT120. All models operate at 3 phased 400 V/50 Hz voltage. The absorbed intensity varies from 44A to 174A, and power ranges from 18+12 kW to 60+60 kW. Water flow requirements are 20 to 30 m3/hr for medium power and 30 to 50 m3/hr for high power models. Hydraulic connections are specified as PVC Ø 63 1/2 unions for medium power and DN 80 fixtures for high power models. The weight of the units ranges from 30 kg to 58 kg.

Installation Guidelines
Installation involves line connection using PVC Ø 63 unions for medium power models and DN 80 collars for high power models. The water flow direction must be correctly set, and a by-pass is recommended if the filter pump flow exceeds 30 m3/hr. The electric power supply should be 3 phased 400 Volts, protected by a 30 mA ground fault circuit breaker.

Equipment Features
The heaters come with a pre-wired electric box that includes a precision thermostat with a digital display, a positive safety high-temperature limiter, a flow switch, luminous command switches, power contacts, and EPDM fixtures. Hypalon moulded electric connections and a U shape design facilitate easy assembly and water retention. Factory power modulation is available in two manual stages.

Description
The heaters feature power contactors, a stainless steel 316 L reservoir, a digital thermostat sensor, a safety thermostat, and a timed digital regulator with on/off switches and indicators. The high power models include a DN 80 collar and a purge outlet, while the medium power models have a Ø 63 flow control and connection terminals.

Catalog excerpts

RE/I Industrial electric heater The ■ For the biggest pools (over 150 m3) ■ Easy to install ■ Complete digital regulator RE/I High Power (thermostat, timer…) ■ Maximum robustness (EPDM fixtures, Hypalon connections) RE/I Medium Power Medium power High power RE/I 30 3 phased model Technical specifications RE/I 36 RE/I 42 RE/I 48 RE/I 60 RE/I 84 RE/I 96 RE/I 120 W40TIT30 W40TIT36 W40TIT42 W40TIT48 W40TIT60 W40TIT84 W40TIT96 W40TIT120 RE/I 96 RE/I 120 Medium power RE/I 30 High power RE/I 36 Maximum volume m3* RE/I 42 RE/I 48 RE/I 60 RE/I 84 Contact us 3 phased 400 V/50 Hz Voltage Contact us 3 phased 400 V/50 Hz Absorbed intensity (A)** 44 52 61 70 87 122 133 174 Power (kW) *** 18 + 12 24 + 12 24 + 18 24 + 24 36 + 24 48 + 36 48 + 48 60 + 60 Water flow (m /hr) 20 to 30 m /hr 3 Hydraulic connections Weight (kg) 30 to 50 m /hr 3 3 PVC Ø 63 1/2 Unions to glue 30 30 30 2 DN 80 fixtures 30 49 51 55 58 * Please send us the completed questionnaire for computerised assessment page 13. ** Operating voltage tolerance + 6 - 10% EDF network supply *** Manufacturing tolerance + or - 5% Non-contractual document subject to modification - Contact your retailer should you require further information - www.zodiac-poolcare.com

Open the catalog to page 1

RE/I INSTALLATION filter pump RE/I water treatment • ine connection using two PVC Ø 63 unions L (RE/I 30 to 48) or by two DN 80 collars (RE/I 60 to 120). • ater flow direction: turn the water flow switch W and the regulation sensors in the right direction. • lan a by-pass if the filter pump flow is over P 30 m3/hr. • lectric power 3 phased 400 Volts protected E by a 30 mA ground fault circuit breaker (not supplied). rejection extraction EQUIPMENT SIZE (in mm) Pre-wired electric box including: RE/I medium power (RE/I 30 to 48) • recision thermostat (±-0,5°C) with digital display. P RE/I high power...

Open the catalog to page 2

All ZODIAC - POOLCARE catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list