*myarchiexpo

OPTIPAC

Product catalog summary

Overview: The document provides technical specifications and installation guidelines for the Optipac All Seasons Heat Pump models, including Optipac 15 D tri, Optipac 30 D tri, and Optipac 30 tri. These heat pumps are designed for pool heating and feature a SCROLL Copeland compressor and refrigerating fluid R 407 C.

Specifications:

Performance: The heat pumps operate under various conditions with different power consumption and Coefficient of Performance (COP) values. For instance, at air 15°C, water 24°C, and humidity 70%, the COP is 3.2.
Power Supply: All models require a 400 V / 50 Hz power supply with specific absorbed intensity and power cable cross-section requirements.
Acoustic Levels: Acoustic power ranges from 82 to 85 dBA, with acoustic pressure at 10 meters ranging from 54 to 57 dBA.
Weight and Dimensions: The Optipac 15 D weighs 350 kg, while the Optipac 30 models weigh 700 kg. Dimensions are provided for installation planning.

Installation Guidelines:

Install outdoors near the technical facility with a hydraulic connection via PVC Ø 63 or Ø 90 for Optipac 30 D.
Ensure a 50 cm gap between the heat pump and the wall.
Electric power supply must be protected by a 30 mA ground fault circuit breaker.
Annual control of the refrigerating circuit's water tightness is required for equipment with refrigerating fluid loads between 2 kg and 30 kg.

Equipment Features:

Includes a single block outdoor air/water heat pump with a TITANIUM water exchanger condenser and a high-performance evaporator.
Features a digital display regulator with on/off switch, heating priority, and optional remote control module.
Safety features include HP and LP safety pressure switches, automatic defrosting, anti-freeze thermostats, and an anti-corrosion casing.

Additional Information: For orders of Optipac 15 D or 30 D, a 30% deposit is required. The document is non-contractual and subject to modification. For further information, contact the retailer or visit www.zodiac-poolcare.com.

Catalog excerpts

All Seasons Optipac Heat Pump The ■ The most powerful heat pump in the range ■ SCROLL Copeland compressor ■ Refrigerating fluid R 407 C ■ All Seasons: “intensive” defrosting by cycle inversion (operation from - 8°C) ■ Heating priority function Optipac 15 D tri **** W20TI30D W20TI30V Optipac 15 D tri **** Technical specifications Optipac 30 tri *** (Standard) W20TI15D Standard model Optipac 30 D tri **** Optipac 30 D tri **** (1) Optipac 30 tri **** Performance conditions 1: Air 15° C / Water 24° C / Humidity 70% (Nominal Zodiac) Consumed power (kW) 14 28 28 Operating power at 15° C (kW) 45 90 90 COP 3,2 3,2 3,2 Performance conditions 2: Air 28° C / Water 28° C / Humidity 80% Operating power at 15° C (kW) 54 108 108 COP 3.53 3,53 3,53 Performance conditions 3:Other power (“cold” conditions) Operating power at 7° C (kW) 36 72 - Operating power at -3° C (kW) 24,5 49 - Average water flow (m3/hr) 15 30 30 Max pool volume** contact us Load loss (mCE) 1,5 1,5 1,5 Hydraulic connection PVC Ø 63 PVC Ø 90 PVC Ø 90 Power supply 400 V / 50 Hz 400 V / 50 Hz 400 V / 50 Hz 52,2 Absorbed intensity (A) 26,1 52,2 Power cable cross section (mm2)** 4x6 4 x 16 4 x 16 Acoustic power (dBA)*** 82 85 85 Acoustic pressure at 10 m. (dBA)*** 54 57 57 Weight (kg) 350 700 700 * Outside air temperature 15°C. ** Please send us the questionnaire for a computerised assessment (page 13). *** For a maximum length of 25 metres. (1) new model available from 1st quarter 2010. Check availability with your sales contact. For all orders of Optipac 15 D or 30 D a deposit of 30% will be requested. ACCESSORIES Remote control module Cleaning Kit PAC Net WCE03469 WMA03491 Non-contractual document subject to modification - Contact your retailer should you require further information - www.zodiac-poolcare.com

Open the catalog to page 1

Optipac All Seasons INSTALLATION no obstacles above • utdoors, close to the technical facility. O water treatment pump filter • ydraulic connection PVC Ø 63 by filter by-pass H (PVC Ø 90 on OPTIPAC 30 D). • Plan a gap of 50 cm between the back of the heat pump and the wall. • lectric power supply protected by a 30 mA ground E fault circuit breaker (not supplied). • n annual control of the water tightness of the A refrigerating circuit must be carried out for all refrigerating equipment with a refrigerating fluid load of > than 2 kg and < than 30 kg (see art 3 of the 7/05/07 decree, French decree...

Open the catalog to page 2

OPTIPAC

OPTIPAC

Catalog excerpts

All ZODIAC - POOLCARE catalogs and technical brochures