Specification Sheet – Zip 20°C to 60°C Range Electronically Controlled Instantaneous Hot Water for sites requiring 60°C water, or for use with tempering valves or TMVs. With Multiple Power System, temperature display, settings of 20°C to 60°C. Optional remote control. Recommended for sites where 60°C temperature may be required, or for use in conjunction with tempering valves or thermostatic mixing valves. TMV-Compatible Range Zip IHW CEX-U – 5 litres/minute, 11.0 kW or 13.5 kW, electronic temperature control. Zip IHW DEX – 8 litres/minute, 118, 21, 24 or 27 kW, electronic temperature control. Zip IHW DSX – Auto controlled flow, 18, 21, 24 or 27 kW. Zip DSX Far more energy efficient. • Far more energy efficient than power-hungry storage hot water systems. • No energy is wasted heating water above pre-set outlet temperature. • No energy is lost by reticulating hot water around the home or building. Far simpler and safer to use. • lectronic control ensures maximum temperature is not exceeded. E • New “bare wire” technology IES® gives fastest possible water heat up. • Hot water never runs out, never runs cold – continuous hot water. • Touch-pad allows you to pre-set the maximum water temperature fast. Far simpler and easier to install. • liminates the cost of installing reticulated hot water as well as cold. E • Wall-mounted unit is easy to install and access, uses no floor space. • Simple to install immediately adjacent to hot water outlets. German engineering backed by Zip support. • ade to Zip specifications by the world leader in instantaneous hot water. M • Supported by close to 100 Zip mobile service technicians Australia-wide. • Plus a coast-to-coast network of more than 300 Zip service providers. • 24 month part replacement warranty (residential) 12 month (commercial).

Specification Sheet – Zip 20°C to 60°C Range Electronically Controlled Instantaneous Hot Water for sites requiring 60°C water, or for use with tempering valves or TMVs. With Multiple Power System, temperature display, settings of 20°C to 60°C. Optional remote control. Zip IHW Model Temp Settings Nominal Capacity Power Rating Rated Current ASupply Voltage Water Resistance (min)* IP Rating W x D x H (mm) *Permissible minimum electrical resistance of water at 15°C. Location Technical Assistance To minimize thermal losses, the distance between the appliance and the outlet fitting should be as short...