video corpo

Elefeet® System Solutions for Raised Paving and Decking
12Pages

{{requestButtons}}

Catalog excerpts

Elefeet® System Solutions for Raised Paving and Decking - 1

PLANNING GUIDE Elefeet® System Solutions for Raised Paving and Decking

Open the catalog to page 1
Elefeet® System Solutions for Raised Paving and Decking - 2

More Possibilities with ZinCo Technical Principles General Information on Walkways on Roofs Paving Slabs on Elefeet® Pedestals Elefeet® pedestals and Accessories The Elefeet® Support Rail System Accessories for the Elefeet® Support Rail System Elefeet® Rail System for Wood Decking

Open the catalog to page 2
Elefeet® System Solutions for Raised Paving and Decking - 3

Symbol Force Load Additional Forces Category H Single person, total load 1.0 kN maintenance and (at a critical point) servicing on green roofs, e.g. roof gardener, chimney sweeper At a progressing rate, roofs are being used holistically and now almost everything which can be realised on ground, is possible on roofs as well. To create long lasting and functioning walkways and driveways on roofs it is crucial to use the right technique. This planning guide will provide essential information. Category Z Residential Buildings total load 4.0 kN/m2 single load 2.0 kN/m2 Drainage In contrast to...

Open the catalog to page 3
Elefeet® System Solutions for Raised Paving and Decking - 4

Slabs are laid loosely on the chippings. In order to prevent any movement, there must be a stable edging all round. Slabs installed on a chipping base are generally recommended where a combination of greenery and walkway is required or where the load-bearing capacity is sufficient. Pavers with a thickness of at least 4 cm should be used because thinner pavers are not ideal for installation on chip-pings. They have a lower mass and will therefore break quicker. They are also difficult to tap or vibrate when they are being laid. Installation on pedestals and rail With the rail system on...

Open the catalog to page 4
Elefeet® System Solutions for Raised Paving and Decking - 5

Paving Slabs on Elefeet® Pedestals Elefeet® pedestals are made of stable polypropylene and are classified as construction material B2 in accordance with DIN 4102-1. They are specially suited for use beneath walkways with concrete or natural stone pavers with an all-round stable edging, and they have a load-bearing capacity of up to 600 kg per pedestal as per load class Z in accordance with DIN EN 1991-1-1 (balconies, roof terraces, loggias). As they are infinitely height-adjustable, any unevenness can be easily levelled out, and they are perfect for gradient-free surfaces, so that the...

Open the catalog to page 5
Elefeet® System Solutions for Raised Paving and Decking - 6

The Installation on Elefeet® pedestals offers a number of important advantages: • Precise levelling with vertical adjustment swivel including reverse rotation protection • Very low weight - only the surface layer needs to be considered • Simple to install due to easy to-handle materials and high flexibility • No transport problems (gravel, mortar) to and at the installation site • Spring-loaded detent nose warns against unscrewing too far • Open joints, free from pollution and weeds • Firm support for cut-to-size slabs in the edge area • Load bearing capacity up to 600 kg/pc • Safe drainage...

Open the catalog to page 6
Elefeet® System Solutions for Raised Paving and Decking - 7

Elefeet® Pedestals and Accessories Given the Elefeet® A 12, A 22 and A 67 extension pieces that allow for multi combinations and securely lock into place, a stable overall build-up height up to approx. 500 mm is possible. The new adjusting tool allows for the easy and subsequent adjustment and accurate setting of the required height, even after the pavers have been laid. The buffer pad tailored to fit the head of the Elefeet® ensures a non-slip grip and is ideally suited as a base for thin-layered ceramic tiles. In the edge areas, the practical edge retainers ensure a stable position of the...

Open the catalog to page 7
Elefeet® System Solutions for Raised Paving and Decking - 8

High Loads and Complex Roofscapes -the Elefeet® Support Rail System The Elefeet® Support Rail System allows for the easy construction of a safe and stable sub-structure that is perfectly suited for surfaces without a firm edging. Whether the flooring is made of concrete, thin-layered ceramic tiles or wood: The combination of Elefeet® pedestals with the Elefeet® Support Rail System can be used for virtually any construction challenge. The extensive and perfectly tailored range of accessories in the complete Elefeet® system can be used for almost every geometry, even in the case of high loads.

Open the catalog to page 8
Elefeet® System Solutions for Raised Paving and Decking - 9

Advantages of the support rail system in combination with the Elefeet® pedestals: • Less pedestals are required to achieve the same loadbearing capacity • Ideal substructure for thin-layer ceramic tiles • Laying the actual paving slabs and decks is much faster • Light and weather-resistant substructure for wooden decks • interconnecting all components the By substructure ensures stability during installation and operation • Substructure can be used several times (e.g. if the wooden deck needs to be replaced) • imple and flexible accessories allow S for a stable edging in the case of...

Open the catalog to page 9
Elefeet® System Solutions for Raised Paving and Decking - 10

Prepared for Everything with Stability The ZinCo Elefeet® Support Rail System The quick-fix rail support clip allows the rail to be easily clipped into the head plate of the Elefeet® Pedestals. Steps, ledges and other obstacles are easy to construct with the “rail connector high/low rail”. The "variable distance holder" adapts to any desired surface format and provides a stable substructure with constant dimensions. The various rail connectors allow for easy and stable assembly of the overall substructure. The two "edge holders" ensure stability right up to the edge. These are available in...

Open the catalog to page 10
Elefeet® System Solutions for Raised Paving and Decking - 11

Elefeet® Support Rail System – the Permanent Substructure for Wood Decking The new Elefeet® Rail Support System, together with the Elefeet® pedestals, provides the perfect substructure for wood or WPC decking. We supply the required fixing elements for wood or WPC decking together with the rest of the order. Generally, the fixing elements can be easily screwed into the rails and are invisible. Given the flexibility of the rail system, it is easy to deal with the required decking lengths, in order to retain a stable butt joint for the decking elements. The wood decking can be easily and...

Open the catalog to page 11
Elefeet® System Solutions for Raised Paving and Decking - 12

Flexible, when it matters, because what is important is what is beneath the surface! This system brochure provides a general overview of solutions for raised paving and decking. Our technical experts will be pleased to advise you on specific solutions for your own individual building projects: from the planning phase right through to creating your specification texts. ZinCo GmbH . Lise-Meitner-Strasse 2 . 72622 Nuertingen . Germany Phone +49 7022 6003-0 . info@zinco-greenroof.com . www.zinco-greenroof.com 10/2020 · Technical statements are subject to alterations and printing errors, 12264

Open the catalog to page 12

All ZinCo GmbH catalogs and technical brochures

  1. Green Roof 4.0

    16 Pages

  2. NATURE LINE

    4 Pages

  3. Product List

    50 Pages

  4. Green Roof 4.0

    16 Pages

  5. Natureline

    4 Pages