ESMALTADO Thermosyphon (Glazed) PREMIUM Principales características • Insulation in Polyurethane Foam, 38mm thick and density 40kg / m3; • Exterior finish in AISI304 or white lacquered stainless steel; • Internal expansion vessel system for primary circuit; • Interior protection in glazed enamel; • Double chamber heat exchanger, made of carbon steel; • Supplied with magnesium anode (excluded from warranty as it is a wear component); • Supplied with electric resistance and thermostat. Descripción del producto Water heater constructed with two independent circuits: a primary circuit and a secondary circuit. These circuits are separated from the outside by a wall of insulation material (polyurethane). These accumulators are equipped with an internal expansion vessel system in the thermal fluid (primary) circuit . The sanitary water tank is internally protected with a glazed enamel layer at high temperature to prevent corrosion of the steel.For outdoor and horizontal installation. Modelos y Precios Código Glazed Thermosiphon 150L (White) Glazed Thermosiphon 150L (stainless steel coating) Glazed Thermosiphon 200L (White) Glazed Thermosiphon 200L (stainless steel coating) Glazed Thermosiphon 300L (White) Glazed Thermosiphon 300L (stainless steel coating) TECHNICAL DATA Weight approx. In empty Secondary circuit volume Primary circuit volume Max. Pressure (Secondary circuit) Max. Pressure (Primary circuit) Outer Diameter Operating temperature Electrical Resistance Power Supply Posible cambio sin previo aviso. PVP recomendado. Los precios indicados no incluyen impuestos. Esta ficha técnica no dispensa una consulta del ma