Regina 1.5 Heat Pump
Regina 1.5 Heat Pump
- Accumulator: Vitrified with a 190-litre capacity and magnesium anode to prevent corrosion.
- Thermal Insulation: Excellent, with a loss of only 5 degrees C per day if installed outside.
- Heat Exchange: Features a serpentine heat exchanger surrounding the accumulator, reducing contamination risks.
- Design: Elegant and fully integrated with the accumulator and freezing cycle.
- Thermal Transfer Fluid: R134a.
- Controller: Integrated.
Product Description
The Regina 1.5 Heat Pump is designed for the production and accumulation of sanitary hot water, with a power of 1.5 kW. It is suitable for isolated production and can support a solar system for sanitary hot water production. The energy sources are electricity and outdoor air.
Models and Pricing
- Model Code: 2301-0205
- Model Name: Regina 1.5KW R134a Heat Pump
Technical Data
| Parameter | Economy Mode | Electric Mode |
|---|---|---|
| Output Power - Compressor (kW) | 1.45 | --- |
| Output Power - Resistance (kW) | --- | 3 |
| Input Power - Compressor (kW) | 0.83 | --- |
| Input Power - Resistance (kW) | --- | 3 |
| COP | 3.6 | 1.0 |
| Maximum Input Current (A) | 6.5 | 13 |
| Air Flow (l/m) | 312 / 355 / 414 | 312 / 355 / 414 |
| Electric Supply | 230 ~240V / 50Hz | 230 ~240V / 50Hz |
| Output Temperature Adjustment (°C) | 38 to 70 | 38 to 70 |
| Noise Level (dB(A)) | 41 | 41 |
| Refrigerant Gas - Type | R134a | R134a |
| Refrigerant Gas - Quantity (kg) | 0.9 | 0.9 |
| Sanitary Water Circuit - Capacity (litres) | 190 | 190 |
| Connections | DN20 | DN20 |
| Test Pressure (bar) | 12 | 12 |
| Exchanger | Condenser outside the accumulator | Condenser outside the accumulator |
| Environment Working Temperature (°C) | -7 to 43 | -20 to 45 |
| Water Flow T=40°C (m3/h) | 0.043 | 0.086 |
| Water Flow T=40°C (l/m) | 0.7 | 1.43 |
| Air Admission - Diameter (mm) | 160 | 160 |
| Air Admission - Static Pressure (Pa) | 15 | 15 |
| Air Admission - Maximum Length (mm) | 5 | 5 |
| Dimensions Diameter / Height (mm) | ø568 / 1640 | ø568 / 1640 |
| Liquid Weight / Gross (kg) | 94 / 110 | 94 / 110 |
Catalog excerpts
:anTO Inspired by Comfort! Regina 1.5 Heat Pump Principals Caraterfsticas • Vitrified accumulator of 190litres with magnesium anode to avoid corrosion; • Excellent thermal insulation of the accumulator ( Loss of just 5 degrees C /day, if installed outside); • Serpentine of heat exchange that surround the exterior of the accumulator. Saffer and with less risks of water contamination due to a leak of a refrigerant fluid that is inside the serpentine. • Greater exchange area in the serpentine at the bottom of the accumulator for a greater temperature homogeneity inside the deposit; • Elegant design, full integrated solution with accumulator and freezing cycle in the same set, it integrates veRy well in any type of space; • Thermal transfer fluid: R134a; • Integrated Controller; Descri^ao do Produto Heat pump for Sanitary Hot Water production and accumulation with powers of 1,5 kW. Ideal for the Sanitary Hot water isolated production and accumulation and support in series to a solar system of Sanitary Hot Water production. The energy source used is the electricity and the outdoor air.
Open the catalog to page 1
A.Q.S Componentes Filter Evaporator Compressor Junction Box Cover Front Cover Rear Cover Junction Box Water Outlet Water Inlet Electric Fleater Front Decorative Board Cover(Electric Heater) Output Power - Compressor (kW) 1,45 --Output Power - Resistance (kW) --- 3 Intput Power - Compressor (kW) 0,83 --- Intput Power - Reistance (kW) --- 3 COP Maximum input current (A) Air flow - Low/Medium/High (l/m) Electric supply Output temperature adjustment (degree C) Noise level (db(A) Refrigerant gas - Type Refrigerant gas - Quantity (kg) Sanitary water circuit - Capacity (lts) Connections Test pressure...
Open the catalog to page 2
A.Q.S Air admission - Diameter of Fresh air admission (mm) Air admission - Static pressure (Pa) Air admission - Maximum length (mm) Dimensions Diameter / Height (mm) Liquid weight / Gross (kg) Possíveis alterações sem aviso prévio. Preços recomendados de venda ao público. Os preços indicados não incluem i.V.A. Esta ficha técnica não dispensa a consulta do manual de ins
Open the catalog to page 3All ZANTIA catalogs and technical brochures
BRADFORD NEO Wood Boiler3 Pages
BELFAST NEO Wood Boiler2 Pages
Water Heater PARIS3 Pages
ROMA ECO-EN2 Pages
ROMA WALL BOILER2 Pages
Radiators Accessory1 Page
Solar Colector ZHS-ECO2 Pages
AC Multisplit MONTANA R2 Pages
MULTISPLIT1 Page
ACCESSORIES1 Page
BRAZED2 Pages
MV-3V Controller1 Page
HEAT PUMPS2 Pages
HEITOR1 Page
TITO1 Page
TOULOUSE2 Pages
Nice2 Pages
LYON2 Pages
ELECTRA Pellets Boiler2 Pages
NARA PLUS Pellets Boiler2 Pages
Water Flow1 Page
Ottawa Heat Pump3 Pages
Quebec Heat Pump2 Pages
TORONTO DC Heat Pump2 Pages
Toronto Plus Heat Pump3 Pages
MIRABEL Heat Pump2 Pages
VICTORIA Heat Pump2 Pages
Regina 3.5 Heat Pump2 Pages
MONTREAL PLUS 7 and 15 Plus2 Pages
MESSINA Wall Boiler1 Page
Venezia Wall Boiler2 Pages
Monza Wall Boiler2 Pages
Air Conditioning20 Pages
Biomass Systems43 Pages
Renewable Energies32 Pages
Heating20 Pages
- Contemporary heating stove
- Metal heating stove
- Black heating stove
- Free-standing heating stove
- Steel heating stove
- Cast iron heating stove
- Pellet heating stove
- Insert
- Boiler
- Indoor boiler
- Wood-burning fireplace insert
- Domestic boiler
- Residential heat pump
- Industrial air conditioner
- White heating stove
- Air source heat pump
- Industrial thermostat
- Industrial solar panel
- Outdoor heat pump