RIB-ROOF SPEED 500
12Pages

RIB-ROOF metal roofing systems stand for high functionality and safety. Our products save time, costs and problems as we emphasize handling and use. RIB-ROOF Speed 500 follows these basic ideas, gaining experience and developing further designs. By focusing on our principles, we have developed a design which satisfies both visually and functionally. The slim and round shaped profiled sheet seam makes RIB-ROOF Speed Convincing design! ✓ Offering design options both in roof appearance and material choices ✓ Standard panel width : 500 mm Proven functionality! ✓ Suitable for all roof build-ups...

RIB-ROOF SPEED 500 INSTALLATION TECHNIQUE RIB-ROOF SPEED 500 INSTALLATION WITH SLIDING CLIPS STRAIGHT PROFILED SHEETS WITH STANDARD CLIP/DIRECTIONAL CLIP FILM OF INSTALLATION PRINCIPLE RIB-ROOF SLIDING STANDING SEAM ROOFING WITH DIRECTIONAL CLIPS ON WOODEN LATHING Discover how the directional clip sets the direction for a linear expansion. Direct link for smartphones, which are QR-capable, or on the Internet http://sliding-standing-seam-roofing.zambelli.de Film of installation principle RIB-ROOF SPEED 500 Discover within two minutes how to install RIB-ROOF Speed 500 with straight profiled...

RIB-ROOF SPEED 500 INSTALLATION TECHNIQUE 3. Insert the next profiled sheet Swivel the next profiled sheet with its small rib under the clip and the large seam. Then swivel downwards and click-into-place (clip). Time-consuming zipping of profiled sheets isn’t necessary. RIB-ROOF Evolution and RIB-ROOF Speed 500 are reinforced in the eaves by joining the bottom booms to an eaves angle. The second profiled sheet is swivelled under the sliding clip... ... and through the clicking-into-place mechanism, a permanent profiled sheet connection is guaranteed. If the RIB-ROOF Speed 500 profiled...

RIB-ROOF SPEED 500 DELIVERY PROGRAM Standard construction width = 500 mm; special construction widths of profiled sheet possible! convex curved Profiled sheet standard construction width 500 mm Standard clip Directional clip Turned directional clip tapered convex curved Special construction width of profiled sheet 400 mm Directional profile tapered concave curved Special construction width of profiled sheet 333 mm Flat clip border concave curved Turned directional profile Perforated clip border Profile filler, top side Cover sheet for verge Suspended profile Stopping plate Variable cover...

TAPERED PROFILED SHEETS RIB-ROOF Speed 500 profiled sheets are also available tapered, curved or tapered curved. Tapered profiled sheets with a minimum construction width 230mm and a maximum of 500 mm are executable. Apart from the standard width 500 mm, we are prepared to manufacture other construction widths on request e.g.333mm, 400 mm or up to 600 mm as a maximum. CURVED PROFILED SHEETS Depending on the material and material thickness (t in mm), the following minimum bending radii have to be observed when curving with machines : Material convex concave 'w' Material thickness t Radius...

COLOUR-COATINGS Aluminium mill finish / stucco-embossed 0.7 / 1.0 mm Aluminium mill finish / stucco-embossed, protective plating on both sides 1.0 mm Alu-zinc steel sheet with alu-zinc alloy corrosion protection class III 0.63 mm mill finish / pre-weathered 0.7 / 0.8 / 1.0 mm Special colours and surfaces are on request available, e.g. in aluminium: We are also prepared to deliver other colour-coatings, materials, thicknesses, and lacquer qualities subject to certain amounts and adequate delivery times. Price on request. Images are similar to RAL colours Aluminium mill finish, coated on both...

SPANS/CLIP DISTANCES RIB-ROOF SPEED 500 2.9.1Speed 500 Wind loads according to DIN EN 1991-1-4/NA Table with max. spans and clip distances (central axis) for enclosed halls, e.g. double pitch roof up to 5° roof pitch. * installation-related, e.g. with lathing or Z-profile metal roofing systems

Speed 500 Wind loads according to DIN EN 1991-1-4/NA Table with max. spans and clip distances (central axis) for enclosed halls, e.g. double pitch roof up to 5° roof pitch. * installation-related, e.g. with lathing or Z-profile

1) The holding bracket distance of a directional clip 200 or a turned directional clip 200 respectively, can be taken for each connection point of directional profiles and turned directional profiles with the substructure. As an example, the sketch shows the allocation of resistivity for directional profiles and turned directional profiles with two connection points (supports). RIB-ROOF Evolution Directiona profile/ 'I' F Rk, A (200) If Rk, B (200)1 F Rk, B (200) If Rk, B (200) Turned directional profile Table with max. spans and clip distances (central axis) for enclosed halls, e.g. double...

1) The holding bracket distance of a directional clip 200 or a turned directional clip 200 respectively, can be taken for each connection point of directional profiles and turned directional profiles with the substructure. As an example, the sketch shows the allocation of resistivity for directional profiles and turned directional profiles with two connection points (supports). Table with max. spans and clip distances (central axis) for enclosed halls, e.g. double pitch roof up to 5° roof pitch.

SIMPLY COVERING FUNCTIONS Zambelli RIB-ROOF GmbH & Co. KG Hans-Sachs-Strasse 3 + 5 94569 Stephansposching Germany Phone +49 9931 89590-0 Fax +49 9931 89590-49 E-mail rib-roof@zambelli.de