PANDA 48 Cell 40mm SERIES ABOUT YINGLI GREEN ENERGY Yingli Green Energy Holding Company Limited (NYSE: YGE) is one of the world’s largest fully vertically integrated PV manufacturers, which markets its products under the brand “Yingli Solar“. With over 7.0GW of modules installed globally, we are a leading solar energy company built upon proven product reliability and sustainable performance. We are the first renewable energy company and the first Chinese company to sponsor the FIFA World CupTM. Solar PANDA is a new monocrystalline silicon module technology with n-type solar cells that have average efficiencies higher than 19.5%. Combined with high transmission glass, module efficiencies are up to 17.1%. to traditional modules with p-type solar cells, PANDA modules have lower initial degradation and higher performance under both high temperature and low irradiation conditions. positive power tolerance of 0W to +5W ensures you receive modules at or above nameplate power and contributes to minimizing module mismatch losses leading to improved system yield. ranking in the “TÜV Rheinland Energy Yield Test” demonstrates high performance and annual energy production. BLACK FRAME BLACK BACKSHEET SILVER FRAME WHITE BACKSHEET by independent laboratories prove that Yingli Solar modules: Fully conform with certification and regulatory standards. Withstand wind loads of up to 2.4kPa and snow loads of up to 5.4kPa, confirming mechanical stability. Successfully endure ammonia and salt-mist exposure at the highest severity level, ensuring their performance in adverse conditions. facility certified by TÜV Rheinland to ISO 9001:2008, ISO 14001:2004 and BS OHSAS 18001:2007. power warranty1: 1 year at 98% of the minimal rated power output, 10 years at 92% of the minimal rated power output, 25 years at 82% of the minimal rated power output. In compliance with our Warranty Terms and Conditions. QUALIFICATIONS & CERTIFICATES IEC 61215, IEC 61730, MCS, CE, ISO 9001:2008, ISO 14001:2004, BS OHSAS 18001:2007, PV Cycle, SA 8000

PANDA 48 Cell 40mm SERIES ELECTRICAL PERFORMANCE GENERAL CHARACTERISTICS Electrical parameters at Standard Test Conditions (STC) Module type Power output Module efficiency Number of modules per pallet Open-circuit voltage Number of pallets per 40' container Short-circuit current Power output tolerances STC: 1000W/m2 irradiance, 25°C cell temperature, AM1.5g spectrum according to EN 60904-3. Average relative efficiency reduction of 3.5% at 200W/m2 according to EN 60904-1. Electrical parameters at Nominal Operating Cell Temperature (NOCT) Power output Open-circuit voltage Short-circuit current...