Catalogs >
Xtratherm >
XtroLiner Soffit Plus [XO/STP]

XtroLiner Soffit Plus [XO/STP]
4Pages

Catalog excerpts

Class ‘O’ Modified PIR Insulation Fire Performance Thermal Conductivity Extensive Range Product Specifications Class ‘O’ Modified PIR Insulation Soffit XO/STP Soffit Plus Board Key Features Class ‘O’ Modified PIR Non-Combustible Impact Resistant Facing Board Thermal Conductivity 0.021 W/mK Class ‘O’/Low Risk Fire Rating Eliminates Cold Bridging HCFC/CFC Free

Open the catalog to page 1

Product Specifications XO Soffit Plus Board Xtratherm XO/STP Soffit Board is a modified PIR rigid insulation board that provides effective thermal and fire protection solutions in structural ceiling applications in commercial and residential buildings. XtroLiner XO range of modified PIR offers excellent insulation performance with a thermal conductivity of 0.021 W/mK and a Class ‘O’ fire rating. XtroLiner is CFC & HCFC free and is manufactured under the highest standards of ISO 9001 and 14001 Quality and Environmental Management Systems. The XtroLiner board is a modified polyisocyanurate...

Open the catalog to page 2

Specification Clause The soffit insulation shall be Xtratherm XtroLiner XO/STP_ _ _mm manufactured to BS EN ISO 9001: 2000 by Xtratherm, comprising a CFC/HCFC free Class ‘O’ rigid modified polyisocyanurate (PIR) core with textured low emissivity foil facings with 6mm building panel. To be installed in accordance with instructions issued by Xtratherm. Refer to NBS clause P10 42, P10 217. Typical U-values XtroLiner XO/STP Thickness Required (mm) Solid Concrete (200mm) Xtratherm XO range is manufactured to EN ISO 13165 under quality systems approved to EN ISO 9001:2000 quality management, EN...

Open the catalog to page 3

Class ‘O’ Modified PIR Insulation Cavity Wall Partial Fill Floors Solid & Suspended Systems XtroLiner XO/CW is an insulation for cavity walls where a residual cavity has to be maintained. The excellent thermal performance of the XtroLiner allows for very good U-values to be achieved whilst minimizing overall cavity wall thickness. XO/CW can be combined with Xtrathem Thermal Liner Boards to achieve U-values down to Zero Carbon fabric standards in traditional wall thicknesses. XtroLiner XO/UF under floor insulation boards are used to reduce the thermal transmittance of ground supported and...

Open the catalog to page 4